What is a 6-pin trailer connector?

In addition to the basic lighting functions of running lights, brake lights, turn signals and a ground wire, a 6-way connector provides one wire for trailer brakes and one wire for a battery connection. …

What is the difference between a 6-pin and 7-pin trailer plug?

The difference between a 6-pin system and a 7-pin is that the 7-pin has a connection for backup lights. What systems are required by law for your trailer depends on where you live.

Why does my trailer have 6 wires?

6-Way trailer connectors are often used on gooseneck trailers, but can be used for other types such as utility, boat trailers and 5th wheels. 6 way connectors include the basic connection of running lights, brake lights, turn signals and a ground wire.

What does a 7-pin trailer connector do?

The 7-Way Trailer Plug is around 2″ diameter connector that allows an additional pin for an auxiliary 12-volt power or backup lights. It is usually used for towing heavy-duty cargo trailers, aluminum trailers, dump trailers, utility / landscape trailers, equipment trailers, open car haulers and enclosed car haulers.

What is the difference between a 4 pin and a 7 pin?

The only real functional difference between them is that on part # 37185 the 4-pole trailer connector is located to the side of the 7-way, rather than under it as with # HM47180. Both adapters plug in at an existing 4-pole vehicle connector and re-format those lighting signals to the 7-way configuration.

Are all 7 pin trailer connectors the same?

Question: Are all 7 way blade connectors the same? Yes, there is only one type of 7-way blade connector.

How do you test a 6 pin trailer plug?

You will need to use a circuit tester, item # PTW2992 if needed, to test the pins in the 6-Way connector at the rear of your vehicle. Ground the alligator clip to the vehicle chassis and touch the test light to the center pin. If the light in the tester lights then the center pin is hot, 12 volts.

What are the colors for trailer wires?

Trailer Wiring Colors

• Brown wire to the tail or parking lights.
• Green wire to right turn signal/brake light.
• Yellow wire to the left turn signal/brake light.
• White wire to common or chassis ground.

Can I replace a 7 pin Ficm with a 4 pin?

Yes you can use either one in any 6.0 however the half shells aren’t compatible with each other for obvious reasons lol one has 7 pins and the other has 4 pins.

Can you convert a 4 pin trailer connector to a 7 pin?

Now if your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a 7-way.

How do you wire a 5 pin to a 7 pin trailer plug?

When wiring a 7-Way on your trailer with 5 wires, your green wire will be right turn/brake, the yellow wire will be left turn/brake, the brown wire will be the taillights, and the white wire will be the ground.

https://www.youtube.com/watch?v=KyDY8-UOI6U