Why does my Kenmore washer not spin?

Why does my Kenmore washer not spin?

If the drive belt is broken or loose, replace it. The motor coupling connects the motor to the washing machine transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. If the door latch is defective, the washer will not spin or start.

What do you do when your washing machine won’t spin or drain?

What to Do When Your Washing Machine Won’t Drain

  1. Perform a Master Reset. Unplug your washer for about one minute.
  2. Test the Lid Switch Assembly.
  3. See if the Drain Hose is Kinked.
  4. Check the Drain Hose or Pump for Clogs.
  5. Clean out the Coin Trap.
  6. Check the Water Level Control.
  7. Schedule Washing Machine Repair.

What’s wrong when washer won’t spin?

If your washer fills with water but doesn’t agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drive washing machines do not have belts.)

How do I force my Kenmore washer to drain?

Squeeze the locking pin on the end of the drain hose that is connected to the back of the washer if you will be draining the water into a floor drain. Pull the hose away from the washer to disconnect it. The water will pour out as soon as the hose is disconnected.

Why is my Kenmore washer not spinning?

There are three possible reasons your washer isn’t spinning. The belt is broken, loose, or frayed. The belt transfers the power from the motor to the drum. If the belt can’t spin and turn the drum, the washer won’t spin. The motor.

Why is my Kenmore front load washer leaking water?

Damaged Door. Water or suds can leak from a front-loading washer if the seal around its door has become compromised. Detergent residue and other debris can collect in the door’s gasket and prevent it from closing completely, so water or suds can leak from the machine when it is in operation.

Why is my front load washer not draining?

The Front Load Issue Drain pump. It is pretty normal when a small clothing get stuck within the drain pump. Obstructed hose or pump. Just like the previous case, a small part of the clothing can go to the drain system, obstructing the pump or the pump hose. Opened lid. Door lock switch and motor assembly.

Why does my front loading washing machine stink?

Cleaning the Drain Pump in Front Load Washers. Another reason why washing machines start to smell is due to debris stuck in the drain pump in the machine. Cleaning out the drain pump will help get rid of things that are blocking proper water flow within the machine. Front-load washers normally have a filter or trap within the drain pump.