What size beads for render?
a 10mm bead can be used with a 15mm render providing that the bead is fixed to allow for sufficient render thickness. Some contractors prefer the assurance of using beads that are designed at the render specified thickness as to eliminate any on site risks.
What beads for external render?
Angle beads, also known as corner beads or quoin beads, are used on corners and returns of external rendered elevations and apertures. Angle beads reinforce the render system at the corners and returns, helping to reduce impact damage and keeping the render edges sharp.
Can you use metal beads with K Rend?
K Bead is a range of durable uPVC beads designed to be used with K Rend renders. They are ideal for damp, wet or corrosive environments or where plaster drying times may be extended. External uPVC Angle Bead, with expanded wings for reinforcing external angles providing a precise, clean finish.
How do you install render drip bead?
Set stop beads into the render dabs and push into reveals against window and door frames. Push corner beads onto external corners and tap to level. Once the beads are aligned, apply render over the wings and allow to set hard.
How thick is K rendering?
K Rend LW1 is applied directly onto polystyrene insulation, minimum finished thickness 12mm. The material should be applied 14mm thick, in 2 passes; the first pass approx. 6mm with K Rend Alkali Resistant Reinforcing Mesh embedded into the first pass whilst it is still soft.
What is the best render for a house?
Lime plaster is a great option for those looking for a breathable house rendering system….The advantages of lime render in include:
- It is more flexible than cement.
- It is breathable so prevents problems with moisture getting trapped within the wall — a common problem where cement renders are applied to old walls.
How thick should render be on external wall?
Traditional renders should be applied in 2 coats. The first coat should not exceed 15mm thickness and the second coat should be 5-7mm. The first coat should be slightly stronger than the second coat. Render designation M4/iii should be used.
How much does 1 bag of K Rend cover?
Coverage: 2kg per mm thick per sq metre Required: 20-24kg per square metre appx. SILICONE FT is also designed as a one-coat finish over block-work.
Does K Rend crack?
ο Hairline cracks – appear on the render surface only. In general it is advisable to leave the crack for as long as possible to stabilise before any repair is carried out.
How long do you leave render before sponging?
If you notice that the float is ‘pulling’ at the surface of the render, it may not be ready to be floated. Wait for 10 minutes and try again. If you are applying a second coat, wait at least 24 hours between coats. There are a wide variety of finishes that can be achieved.
What is the Sto mesh corner bead standard?
Sto Mesh Corner Bead Standard provides a solution to create true and straight corners which are resistant to chipping and cracking in StoTherm ® ci wall systems.
What are the benefits of a Sto render system?
Sto renders feature greater durability, exceptional flexibility and are through-coloured to reduce maintenance requirements. Available in up to 800 colours from the StoColor System, dependent on the selected finish Stippled, rilled and ‘freestyle’ textures and a range of grain sizes available for a wide selection of design options
How many colours can a stocolor render system produce?
Available in up to 800 colours from the StoColor System, dependent on the selected finish Stippled, rilled and ‘freestyle’ textures and a range of grain sizes available for a wide selection of design options Reinforced systems available for more than 15 times the crack resistance of conventional cementitious render systems
How to order quality render beads for free?
Express Delivery options available on orders. Exclusive offers, Quality Products and Great Savings. Please complete the contact form below and a member of the team will get back to you as soon as possible. Some fields below must be completed before you can send your enquiry. Please select the bead types you would like to receive free samples of.