Should metal detection be a CCP?
metal detection or separation as the CCP. such a device, you should have procedures to periodically check the processing equipment for damage or lost parts at each processing step where metal inclusion is identified as a significant hazard. In this case, you should identify those processing steps as CCPs.
Is metal detection a CCP or OPRP?
Metal detection as the last process step before the product leaves site is a CCP. It is critical. There are no further steps that will reduce or eliminate the hazard.
What is metal detector in food industry?
Metal detectors for food primarily are used for the purpose of consumer protection. Despite maximum care metallic contaminations of food products during the production process cannot be fully excluded. In addition to consumer protection, metal detectors also are used to protect machinery.
How do you test for metal in food?
Metal detectors use electromagnetic fields to find things that are magnetic and conductive. Most food products are wet, have salt or contain minerals, which when subjected to electromagnetic fields also look magnetic and conductive.
How do you check a metal detector?
So that’s the first thing you need to validate – where the test piece should be. To do this, measure the detector head height from the conveyor and record it on your validation report. Then, record the product sizes you make and the size of each – to show where the height of the product sits against the detector head.
What does OPRP mean?
Operational Pre-requisite programme
OPRP (Operational Pre-requisite programme) Definition: Control measure or combination of control measures applied to prevent or reduce a significant food safety hazard to an acceptable level, and where action criterion and measurement or observation enable effective control of the process and/or product.
Can aluminum foil be detected in a metal detector?
Aluminum foil will block the x-rays that the postal service uses. But most metal detectors won’t notice the aluminum foil. That means you can’t hide something else with foil at the airport, and if someone uses x-rays they will see a big blank spot and make you open the suitcase up anyway.
What is the working principle of a metal detector?
Metal detectors work on the principle of transmitting a magnetic field and analyzing a return signal from the target and environment. The transmitted magnetic field varies in time, usually at rates of fairly high-pitched audio signals.
How do you check your metal detector for HACCP?
Maintenance Hygiene Checks, Who should be on your HACCP team, How to test your metal detector, Approved Supplier HACCP certificates along with the food recall and food poisoning wrap-up.
When is a metal detector required to be a CCP?
The presence of a metal detector does not automatically require that it be designated as a CCP. However, if the hazard analysis determines that metal is a food safety hazard reasonably likely to occur, 9 CFR 417.2 (c) (2) requires that the HACCP plan include at least one CCP to control it, and thus the metal detector may be a CCP.
Is a metal detector required to be a critical control point?
No. The presence of a metal detector does not automatically require that it be designated as a CCP. However, if the hazard analysis determines that metal is a food safety hazard reasonably likely to occur, 9 CFR 417.2 (c) (2) requires that the HACCP plan include at least one CCP to control it, and thus the metal detector may be a CCP.
What are the requirements for a metal detection system?
The require- ments set out the need to have in place metal detection equipment based on an assessment of risk. Requirements cover the location of equipment, reject systems, procedures to be followed for checking of the unit and corrective actions.