How do I make my Pioneer Blu Ray player region free?

How do I make my Pioneer Blu Ray player region free?

Blu Ray Region Free Hack Method 1 – blu ray region code remover

  1. (Works with most Blu Ray and DVD players)
  2. Power ON the DVD player with no disc.
  3. Wait for the “No Disc” message to show.
  4. Press PAUSE on the remote control.
  5. Enter 3, 1, 4, 1, 5, 9 on the remote control (CODE or FF appears on the TV)

Are Pioneer DVD players region free?

Founded in 1938, Pioneer has literally “pioneered” the growth of home electronics. In today’s age, they are still moving forward on the leading edge of home video technology with the production of Pioneer Region-Free Blu-Ray Players.

How do I change my Blu-Ray player to multi region?

Change Blu-Ray Disc Regional Code Settings in PowerDVD In the main PowerDVD menu, select Settings. In the Settings page, select BD Settings. Select the region you want from the Region Selection drop-down menu. The default setting is Region A.

How do I know if my Blu-Ray player is region free?

The region code for Blu-ray Discs is on the disc or located at the back of the disc case. Note: Some region-free discs may have no codes written on the disc or disc cover. Ultra HD Blu-ray Discs are region-free and can play on devices that supports Ultra HD Blu-ray, regardless of the region where they were purchased.

How do I get around a DVD region code?

For example, The United States is NTSC and Europe is PAL. Most NTSC players can’t view PAL DVDs, but PAL players generally merely ask for a region-free DVD player to play NTSC DVDs. Therefore, in NTSC countries like the USA, it is best to use a region-free, multi-standard player and multi-standard TV to open PAL DVDs.

How do you hack DVD region codes?

I checked out VideoHelp found the following region hack:

  1. Power on.
  2. Open tray.
  3. Push the info on remote once (with supplied remote). You will see numbers.
  4. Press 9 for multi-region. Keep trying until you see the number 9 appear in upper left corner.
  5. Power off.
  6. Power on.

How do I fix the wrong region on my DVD player?

Solution 2: Change DVD Drive Region Code

  1. Head to “This PC” or “My Computer”.
  2. Right-click on the target DVD drive, then select “Properties”.
  3. Go to “Hardware”, select the disk drive you want to change region code of, then hit “Properties”.
  4. Click “DVD Region”.
  5. Hit OK to save the modification and play the DVD again.

Can I play a region 1 DVD in Australia?

Can I play region 1 DVD in Australia? Region 1 DVDs are produced to play in the USA and Canada. If you use a region-free DVD player in Australia, you can play region 1 DVD. If your DVD player is set to region 4, you can’t play region 1 DVD.

How do I make my Pioneer DVD player region free?

So, if you do have a DVD player that you’d like to convert, you can try it….Here’s the best part.

  1. Power on.
  2. Open tray.
  3. Push the info on remote once (with supplied remote). You will see numbers.
  4. Press 9 for multi-region. Keep trying until you see the number 9 appear in upper left corner.
  5. Power off.
  6. Power on.

Is Blu-ray region-free?

Blu-ray Discs use a much simpler region-code system than DVD with only three regions, labeled A, B and C. As with DVDs, many Blu-rays are encoded region 0 (region free), making them suitable for players worldwide.