What does flashing red light mean on Yealink phone?

What does flashing red light mean on Yealink phone?

If the phone’s LED indicator is fast flashing red, that means the phone is ringing or the network is disconnected. If the phone’s LED indicator is off then the phone is either off, or there are no notifications or activity.

How do I turn off the red flashing light on my Yealink phone?

If needed, you can enable or disable these light indicators in the phone’s web interface.

  1. Access the Yealink phone web interface.
  2. Click Features.
  3. Click Power LED in the left navigation menu.
  4. Click the drop-down menus to enable or disable the light indicator for the corresponding option.
  5. Click Confirm.

How do I troubleshoot my Yealink phone?

Troubleshooting

  1. Make sure the phone is properly plugged into a functional AC outlet or a power over Ethernet (PoE) switch.
  2. If the phone is plugged into a power strip, try to plug it directly into a wall outlet instead.
  3. If your SIP-T23P/T23G IP phone is powered from PoE, ensure you use a PoE-compliant switch or hub.

How do I turn off yealink missed call notification?

Disabling Notification LED on Cordless Yealink Phones

  1. Press OK on a handset to enter the main menu.
  2. Go to the Settings > Display > Notification Light.
  3. Press the left or right navigation buttons to select Enabled or Disabled in the missed calls field.
  4. Press Save to accept the change or Back to cancel.

What is the default password for Yealink phones?

admin
The default password to log into the Yealink Phone is ‘admin’ which is not secure, it is recommended to change the password to something more secure. You may also have a need to reset the whole phone should your experience any software error with the phone or forget your password.

How do I reset my Yealink t21p e2?

Method 2: Via phone.

  1. Press Menu Softkey.
  2. Go to Settings—Advanced UI, input password to enter.
  3. Select Reset to Factory option. The LCD screen will prompt with: ”Warning, Reset to Factory Setting”. Press OK to continue.

Why is my Yealink phone showing no service?

When a Yealink IP Phone displays the words “No Service” it means the device was unable to successfully register to our network. If the phone is connected to a networking device, try plugging it into a different port on the device (to see if a faulty port is the issue).

How do I check my voicemail on yealink?

To listen to the voicemail using the menu via the handset:

  1. Press OK to enter the main menu.
  2. Select Voicemail > Play Message.
  3. Press Up or Down key to highlight the desired line, and then press the Select soft key.
  4. Follow the voice prompt from the system server to listen to your voicemails.

How do I access my yealink web interface?

How to login to the Yealink web interface Print

  1. Get the IP address from the phone and enter the IP address into a web browser. You will need to the enter the IP address into the web browser – this should take you to the login screen.
  2. For the username enter ‘admin’
  3. For the password enter ‘admin’