How do I crop an isometric view in Solidworks?

How do I crop an isometric view in Solidworks?

To crop a view:

  1. In a drawing view, sketch a closed profile such as a circle.
  2. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.

Can you crop a section view in Solidworks?

You can crop any drawing view except a Detail View or a view from which a Detail View has been created. Crop View can save steps because you do not create a new view. For example, instead of creating a Section View and then a Detail View, then hiding the unnecessary Section View, you can crop the Section View directly.

How do I change crop view in Solidworks?

Editing a Crop View

  1. Right-click the drawing view in the graphics area or in the FeatureManager design tree and select Crop View > Edit Crop.
  2. Edit the profile.
  3. Click Rebuild to update the view.

How do you change the isometric view in Solidworks?

Click Tools > Customize and select or clear Use Large Tooltips to enable or disable the view previews. flyout button in the Orientation dialog box to select axonometric (isometric, dimetric, or trimetric) views and to set which type of axonometric view is displayed when you select a View Selector corner.

How do I crop view?

Cropping a View

  1. In a drawing view, sketch a closed profile such as a circle.
  2. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.

How do I crop a section view?

How do I use crop view?

How do I view sections in Solidworks?

(View toolbar) or View > Display > Section View….Section Views in Models

  1. Select bodies or components to include in or exclude from section views.
  2. Toggle the view off and on.
  3. Show or hide a section cap.
  4. Select the faces, edges, and vertices created by a section view.

How do I change the coordinate system in Solidworks?

Moving a Coordinate System

  1. Click Coordinate System (Reference Geometry toolbar) or Insert > Reference Geometry > Coordinate System .
  2. Define the coordinate system at a location on the part or assembly that provides the entities you need to control the angle and direction of each axis.

What do you call the growing of two or more crops simultaneously in a given piece of land?

Intercropping. The growing of two or more crops together or one after another on the same land in the same cropping season. Intercropping can be in distinct rows, strips, or haphazard.