Is Polycom SoundStation 2 analog or digital?

The Polycom SoundStation 2 is an analog conference phone built to provide high quality audio conference calls. With Polycom’s Acoustic Clarity Technology and support for dynamic noise reduction, the SoundStation 2 remains one of the most popular conference phones on the market.

Does Polycom make analog phones?

The SoundStation2 Analog Conference Phone from Polycom features intelligent microphones, speakers, and audio technology to ensure that you can hear and be heard. It supports up to ten participants at once and full duplex technology for a natural and simultaneous two-way conversation without clipping or drops.

How do I use Polycom as a speaker?

General Use

1. Place Polycom in the center of the table, away from papers and other objects.
2. Plug power unit into an electrical outlet. Plug the short cable into an “active” ANALOG (single line) jack.
3. To place a call, press the ON/OFF switch, wait for dial tone, and then dial the number.

How do I connect my Polycom SoundStation 2 to my phone?

Connecting the SoundStation2 to a mobile phone such as an Apple Iphone: you simply need an Polycom 3.5mm Smartphone cable from Polycom. Attached the cable to the Polycom Soundstation2 or Soundstation2W, your mobile phone is now the source for your communication if no landline is available.

How do I connect my Polycom soundstation 2 to my computer?

Connecting your SoundStation2 or SoundStation2W to your computer is easy: Simply connect the computer calling cable to the Applications Port on your Polycom conference phone at one end. Then, attach the other end to your computer’s microphone and speaker ports.

How do you make a conference call on a Polycom SoundStation 2?

Polycom SoundStation2: Conference a Call

1. Start a call with Polycom SoundStation2.
2. Press the Conference button . Places the first call on hold.
3. Dial the number and connect with the second party.
4. Press the Conference button. This will merge the three calls.

What is a analog phone?

A telephone that sends and receives electrical frequencies in the range of the human voice. Single-line and two-line phones that plug directly into landlines from the telephone company are analog.

How do I connect my Polycom SoundStation 2 to my computer?

How do I set up my Polycom soundstation?

Polycom Soundstation IP4000 Conference Phone Setup

1. Connect one end of the Network Cable to your Data Network port and connect the other end to the Network (LAN) port on the Power Interface Module (PIM).
2. Connect the 25 ft.
3. Connect the Power Adapter to the AC Adapter port on the PIM.

How do I connect my Polycom to my laptop?

Connect Your Polycom Phone

1. Locate the LAN and PC ethernet ports on the bottom of the phone.
2. Connect the ethernet cable for your network into the LAN port.
3. Connect an ethernet cable from your computer or laptop dock/port replicator to PC port, if applicable.
4. Complete the setup process:

How do I set up a Polycom conference call?

How to set up a conference call

1. Call the first person.
2. From Lines or Calls view, press More and then Confrnc. The active call will be put on hold.
3. Using the Dialer, call the second person.
4. When the second person answers, press More and then Confrnc to join everyone in a conference.

How do you do a 3 way call on Polycom?

How to make conference calls (3-way calling) with a Polycom Conference Phone?

1. Call the first Party.
2. Press FLASH, and wait for the dial tone.
3. Call the second Party.
4. Press FLASH, to conference the two lines together.