How much does a D3B cat weigh?

How much does a D3B cat weigh?

16836.8 lbs
Operating Specifications

Fuel Capacity 30.2 gal (114 l)
Operating Weight 16836.8 lbs (7,637 kg)

What engine is in a cat D3B?

Engine. A Caterpillar D3B Crawler Tractor uses a Caterpillar 3204 engine with four cylinders and natural aspiration. The displacement for this motor is 317.3 cubic inches. With the motor running at 2,400 rpm, the engine creates 65 horsepower.

How many horsepower is a Caterpillar d3?

62 hp
Engine

Displacement 317.4 cu in (0 m)
Engine Model 3204
Gross Power 62 hp (46 kw)

How much does a Case 850 dozer weigh?

16089.4 lbs
Operating Specifications

Alternator Supplied Amperage 42 A
Fuel Capacity 40 gal (151 l)
Hydraulic Fluid Capacity 12.1 gal (46 l)
Operating Voltage 24 V V
Operating Weight 16089.4 lbs (7,298 kg)

How many horsepower is a D5 dozer?

170 horsepower
Cat D5 dozer pairs a 170 horsepower engine with fully automatic 3-speed transmission with lock-up clutch. Caterpillar D5 dozer has an operating weight range of 37,875 to 42,263 pounds.

How much does a D5 dozer weight?

37875 lb 17180 kg
VPAT

Operating Weight 37875 lb 17180 kg
Ground Pressure 6.9 psi 47.6 kPa
Width of Standard Shoe 24 in 610 mm
Blade VPAT VPAT
Blade Capacity 4.6 yd³ 3.5 m³

How much does a 450 John Deere Dozer weight?

450KCrawler Dozer. Operating Weight: 7 959–8 522 kg (17,510–18,752 lb.) Track on Ground: 2 184 mm (86 in.)

How much weight can a d3 dozer pull?

Winch

Weight 1345 lb 610 kg
Maximum Line Pull – Bare Drum 40000 lb 18144 kg
Drum Capacity – Optional Cable 256 ft 78 m
Winch Length 27.76 in 705 mm
Drum Width 10.8 in 274 mm

How much does a Case 750 dozer weight?

Operating Specifications

Long track 20040.1 lbs (9,090 kg)
Low ground pressure 20666.2 lbs (9,374 kg)
Operating Weight 20666.2 lbs (9,374 kg)
Winch 1982 lbs (899 kg)

How much does a Case 650 dozer weight?

18200 lbs
Operating Specifications

Alternator Supplied Amperage 65 A
Fuel Capacity 50 gal (189 l)
Hydraulic Fluid Capacity 20 gal (76 l)
Operating Voltage 12 V V
Operating Weight 18200 lbs (8,256 kg)

How much fuel does a D5 dozer use?

The operating weight of this bulldozer is 25,794.1 lb., and the operating weight is the total weight of the machine plus a full tank of gas and the average weight of a person. The fuel tank holds up to 65 gallons.

How much horsepower does a D6 dozer have?

215-horsepower
The 215-horsepower Caterpillar D6 dozer offers either electric drive (XE) or fully automatic powertrain, with operating weight ranging from 47,949 to 53,126 pounds. With both drives, the operator sets the ground speed and maximum power is provided based on load.

How big is a caterpillar D3B tracked tractor?

Caterpillar D3B Specifications. Tracked Tractor. Construction Machinery. Tracked Tractor Caterpillar D3B 8 l. 114 l. 20 l. 12 l. 70 l. 5.2 l. 1. Length with blade 2. Width between caterpillar tracks 3. Height to cab upper part 4. Caterpillar track length on ground level 5. Clearance 6. Length without blade 7. Track width 8. Standard shoe size

When did I buy my first cat D3B?

Discussion in ‘ Dozers ‘ started by 99580l, Sep 11, 2010 . Hey guys, I just bought a late 1980s Cat D3B to use around my place. I specifically wanted a smaller machine so i could get around easier between trees and such.

Is the cat D3B a good solid machine?

Hey guys, I just bought a late 1980s Cat D3B to use around my place. I specifically wanted a smaller machine so i could get around easier between trees and such. It seems like a good solid machine but it does need some attention. Specifically it needs the brakes adjusted or replaced as they require quite a bit if pressure to turn the machine.

Is there a Repair Manual for a D3B?

I don’t have a repair manual for this Cat but have read an older D3 manual. There it says that the steering clutch has to be removed, press off the hub and then you can remove the final. Would this apply to the D3C?