What is the strongest Hilti epoxy?
Hilti HIT-RE 500 V3 has the highest bond strength on the market—60 percent higher than Hilti HIT-RE 500-SD technology (the previous market leader).
How much does Hilti epoxy cost?
Hilti Injectable Mortar Epoxy Hybrid adh HY 200-R
| Was: | $38.90 Details |
|---|---|
| Price: | $34.50 |
| You Save: | $4.40 (11%) |
What is the shelf life of Hilti epoxy?
12 months
Hilti HIT-RE 500 V3 Epoxy Mortar
| Anchoring Elements | HIT-V threaded rods |
|---|---|
| Cleaning Procedures | Automatic cleaning |
| Storage and Transportation Temperature Range | 5 – 25 Degree C |
| In-service Temperature Range | -40 – 70 Degree C |
| Shelf Life | 12 months from date of manufacture (at 23 DegreeC and 50% relative humidity) |
Can you use Hilti epoxy in the rain?
Hilti Verified Eghtesadi: Yes, a wet hole can affect the performance of post-installed adhesive anchors.
How long does it take for Hilti 200 epoxy to cure?
Gel/Full Cure Time Table (Approximate)
| Base Material Temperature (°F) | Base Material Temperature (°C) | tcure |
|---|---|---|
| 23 | -5 | 20 hrs |
| 32 | 0 | 7 hrs |
| 50 | 10 | 2 hrs |
| 68 | 20 | 1 hr |
What do you need to know about the Hilti hit-Hy 150?
Hilti HIT-HY 150 with HIT-V / HAS 10 / 2012 632 Hilti HIT-HY 150 with HIT-V / HAS Injection mortar system Benefits Hilti HIT-HY 150 330 ml foil pack (also available as 500 ml and 1400 ml foil pack) – suitable for non-cracked concrete C 20/25 to C 50/60 – suitable for dry and water saturated concrete – high loading capacity
Which is the best foil pack for hit-Hy 150?
Hilti HIT-HY 150 330 ml foil pack (also available as 500 ml and 1400 ml foil pack) – suitable for non-cracked concrete C 20/25 to C 50/60 – suitable for dry and water saturated concrete – high loading capacity – rapid curing – small edge distance and anchor spacing possible – large diameter applications – high corrosion resistant
Can a hit re 500 be used in wet concrete?
At Hilti we believe the performance of our anchors should remain consistent in both conditions, which is why we designed our HIT-RE 500 V3 to take no load reductions when installed into wet concrete. The HIT-RE 500 V3 is designed to give you extended working time for deep holes deeper than 10″.
What can you do with hit-re 500 epoxy anchor?
Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.) Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible