What is the average water consumption for one person?

Estimates vary, but, on average, each person uses about 80-100 gallons of water per day, for indoor home uses. Are you surprised that the largest use of household water is to flush the toilet, and after that, to take showers and baths?

How much water does the average 4 person household use?

What is Average? The water industry estimates that an average person uses 3,000 gallons of water monthly, so a family of 4 would use 12,000 gallons for bathing, cooking, washing, recreation and watering. But a lot of factors come into play when calculating average use.

How many showers can you have in a 40 gallon tank?

A 40-gallon water heater can provide up to 2 showers in an hour (if you’re not using any other water appliances).

How do you calculate water consumption per month?

To determine your dollar amount of water consumption, multiply the units used by your current water rate.

How much water does the average person use in Australia?

This lack of understanding of the value of water impacts user behaviours. Australians consume an average of 82,000 litres of freshwater per person each year.20A further 80 litres of water per connection every day on average are lost by utilities before it even reaches our homes. For small utilities, this figure is around 110 litres per day.21

How much groundwater is used in Western Australia?

Including self-supplied water, groundwater now makes up more than 75% of the water consumed in Western Australia. 3 Reuse water made up 348 GL (almost 4%) of total water supplied by water providers in 2008–09; of this, 98% (341 GL) was supplied through water utilities and 30% (102 GL) was used by agriculture.

When does water consumption start and end in Australia?

Consumption excludes water consumed by electricity, gas, water, and waste services. Australia’s financial year runs from July 1 to June 30; for example, financial year 2017 starts on July 1, 2016 and ends on June 30, 2017. Statista Accounts: Access All Statistics.

How much water does Tasmania use per capita?

During fiscal year 2018, approximately 0.77 megaliters of water were consumed per capita in Tasmania. This was the highest per capita consumption across all states in Australia, and was largely attributed to high industry water consumption. You need a Single Account for unlimited access.