What is a 13-speed double over?

Therefore, a 13-speed double over has to run in 11th gear and an 18-speed has to be in 16th gear to be in direct gear. That is the gear you should be in when pulling mountains.

What is a double overdrive?

The MXR Double-Double Overdrive serves up two classic overdrives in a single housing, selectable with the flick of a switch—a Low Gain circuit for rich, fiery midrange tones and a High Gain circuit that kicks up the gain and emphasizes highs and lows—with tone controls to season your overdriven sound.

Which gear is direct drive in an 18 speed?

16th gear
The standard 13 and 18 speed transmissions are all double overdrive, which means in the 13 speed transmission, 11th gear is direct, 12th gear is . 85, and 13th gear is . 73. With the 18 speed transmission 16th gear is direct, 17th gear is .

How do I use the different ratios on the Roadranger?

The other four ratios are used once in LO range and once again in HI range. Each of the four ratios, when used in HI range, can be split with the splitter control button. After shifting out of the LO position, use the Roadranger repeat “H” shift pattern. LO range and HI range are selected with the range lever.

How many forward speeds does a Eaton Fuller Roadranger transmission have?

13 speed model Eaton Fuller Roadranger transmissions provide thirteen forward speeds and two reverse. The auxiliary section contains LO and HI range ratios, plus the L and H splitter gear ratios. The LO position in the front section is used only as a starting gear.

How do I split speed ratios in hi range?

When in HI range the ratios can be split by using the Splitter Control Button. The Direct/Rearward position gives the 5th, 6th, 7th, and 8th speed ratios: the Overdrive/Forward position splits each of the HI range speed ratios.

How to use the Roadranger repeat “H” shift pattern?

After shifting out of the LO position, use the Roadranger repeat “H” shift pattern. LO range and HI range are selected with the range lever. It is used once during the upshift and once during the downshift sequence. 1.