How hard is it to land a Cessna 172?

How hard is it to land a Cessna 172?

Landing the Cessna 172 isn’t hard, but there are some tips you can use today to turn acceptable landings into great landings. Here are 10 Cessna 172 landing tips you can start implementing today: Fly a Consistent Pattern. Fly the Right Airspeed on Final Approach.

How many feet does it take to land a Cessna 172?

Landing Ground Roll: 575 ft (175 m) Service Ceiling: 14,000 ft (4,267 m) Maximum Climb Rate: 730 fpm (223 mpm) Maximum Limit Speed: 163 kias (302 km/h)

How much is a Cessna 172 UK?

It has always been relatively affordable too, with a new 172 today priced at around £225,000. A second-hand 172 might cost just £25,000. It was an instant success, with 1,400 built in 1956, its first full year.

How long does it take to learn to fly a Cessna 172?

While it varies widely by the student, it can take anywhere from 2 months to 1 year to learn how to fly a plane. A Private Pilot Certificate requires a minimum of 40 hours of flight time, 20 of which must be with an instructor. The national average in the United States is between 60 and 70 hours.

How fast does a Cessna 172 need to take off?

60 knots is considered to be the optimum takeoff speed. This speed will allow enough lift under the wings to give a smooth, stall-free takeoff. What is the landing speed of a Cessna 172?

How much land do you need for a runway?

Your runway must match the performance capabilities of your aircraft. And a runway need not take a great deal of space on a property. An acre is 43,560 square feet so a 2,000-by-75-foot field takes only about 3.5 acres. Runway construction on cleared land is mostly a process of leveling with a tractor and a box blade.

How much does it cost to fill up a Cessna 172?

The Cessna 172 burns about 7-9 gallons per hour with Avgas typically costing about $6 per gallon, hourly fuel costs for the Cessna Skylane run between $42 and $54 per hour.

At what speed does a Cessna 172 take off?

60 knots is considered to be the optimum takeoff speed. This speed will allow enough lift under the wings to give a smooth, stall-free takeoff. What is the landing speed of a Cessna 172? Same as rotation speed, around 60 KIAS with 10-degree flaps.

What is the stall speed of a Cessna 172?

Average is about 17 km/h (9 kn or 10 mph). The stall speed is the speed at which detachment of airstream going over the wing will occur. In practice, it deprives the Cessna 172 of the lift, the pilot, which leads to the free fall of the airplane.

What is the NE of a Cessna 172?

Cessna started production on the 172 in 1956 , manufacturing more than 1,400 aircraft in the first year of production. The 172 evolved as Cessna responded to the flying public’s desire for a more modern, comfortable, and safer airplane.

What type of engine does a Cessna 172 have?

The basic 172 appeared in November 1955 as the 1956 model and remained in production until replaced by the 172A in early 1960. It was equipped with a Continental O-300 145 hp (108 kW) six-cylinder, air-cooled engine and had a maximum gross weight of 2,200 lb (998 kg).