How do you reset the TPMS on a Honda Insight?

How do you reset the TPMS on a Honda Insight?

Scroll to the vehicle Settings screen, and select it. Select TPMS Calibration….Models with steering wheel buttons:

  1. Press MENU.
  2. Select Customize Settings.
  3. Select TPMS Calibration.
  4. Select Initialize.
  5. Select Yes.
  6. Press MENU to exit.

What does TPMS mean on a Honda Insight?

Tire Pressure Monitoring System
Tire Pressure Monitoring System (TPMS) Monitors the tire pressure while you are driving. If your vehicle’s tire pressure becomes significantly low, or if there is a problem with the TPMS or the compact spare tire*1 is installed, the indicator blinks for about one minute, and then stays on.

Why is my TPMS light on?

The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.

Where is the TPMS reset button on a 2010 Honda Insight?

All should be good now, if not, repeat the steps above. To reset the tire pressure monitor or tpms system in your 2010 honda insight vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.

Can I drive with TPMS light on?

It’s not safe to drive around with your TPMS light illuminated. If the light comes on while you’re driving, slow down and get to the nearest gas or service station to inspect the tire.

How do I fix TPMS error?

Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Check your user’s manual if you’re having trouble locating it.