How do you clear error codes on Yale forklift?

How do you clear error codes on Yale forklift?


  1. Disconnect battery + connection.
  2. Replace display. See Electrical System 2200YRM1427 or Electrical System 2200YRM1327 .
  3. Restore battery connection.
  4. Turn truck power ON and press both the Scroll arrow buttons for two seconds.

How do I reset my Yale forklift password?

  1. Looking to change the password on your Hyster or Yale forklift?
  2. Turn the ignition key to the on position.
  3. Press the star button (*) three times.
  4. Enter the forklift password and press the star button (*).
  5. Now that you’re in the service menu, press the 4 or 5 button to go back 1 level if need be.

How do you clear codes on a CAT forklift?

Press and hold the accelerator for 10 seconds or more. Doing so erases the results of the self-diagnostic test, successfully clearing the forklift codes.

How do you reset a forklift?

Toyota forklift maintenance reset

  1. Press and hold buttons B and D simultaneously for 2 seconds. A short beep should sound both at the beginning of the 2 seconds and after 2 seconds has passed.
  2. Press button C within 10 seconds.
  3. Within 10 seconds, press and hold buttons B and D simultaneously for 2 seconds.

How do you clear the codes on a Nissan Forklift?

To erase your Nissan forklift codes, the repairs must first be made. Following the necessary repairs, return to Diagnostic Mode. Hold the accelerator down for a minimum of 10 seconds, then release the accelerator and the Nissan forklift codes should be erased.

How do I set the time on my Yale forklift?

How do I reset the date / time on the control panel?

  1. Light the panel up with the flat of your hand.
  2. Press the blue menu button enter your pin code and press tick.
  3. Then scroll down to advanced settings.
  4. Then scroll right to the bottom of that menu to time and press tick.

How fast can a Yale forklift go?

To move more loads per hour, fast cycle times are essential. That’s why the MR series offers maximum travel speeds up to 8.7 mph, mast speeds to 143 fpm and mast lifting heights up to 502 inches.

How do you clear the codes on a Unicarrier forklift?

What does SAS mean on a forklift?

System of Active Stability
Toyota SAS Protects Forklift Operators System of Active Stability (SAS) works by continually monitoring the forklift’s operations and automatically taking protective action when needed. This was all implemented on most Toyota forklifts in 1999 in order to protect operators in potentially hazardous situations.

Where to find error code on Yale forklift?

In order to troubleshoot and diagnose the error code you get on your Hyster or Yale forklift (2005 and newer models), please look for your error code and its description in the table below. If you need further assistance with repairing your machine, please contact us.

How to clear forklift error codes-forklift plus?

In different forklift, each Error code means different things. On Yale and Hyster forklift the error code can be showed or can be in the system. How to going inside the system to clear the error codes? for going inside the system you need the password that the company using or can be changed by the dealer before they ship it to the customer.

What is the fault code on a Hyster forklift?

Hyster H60FT has a fault code 523920-3. I did not see it on the table. Any help is greatly appreciated.

What’s the error code on a Raymond forklift?

I have a forklift Raymond Model is 4450 and the error code 1c is show me in the dash I unpluged and pluged the battery but samething I have and when I want to go reverse the speed will be too slow or will stop the forklift. Do anyone have the idea what is wrong with it? and what is the solution.