How do I setup my Linksys router after resetting?
1 Factory Reset
- Ensure the router is ON.
- Using a paper clip, push and hold the Reset button.
- Hold the reset switch for 10-15 seconds.
- Disconnect and reconnect the router’s power adapter.
- Once it fully reboots, you can use the default username and password to connect the device.
Why is my Linksys router not connecting to Internet?
To resolve this issue, you can reset your router to factory default settings, uninstall and reinstall the Linksys Connect Software on your main computer, then reconfigure your router’s settings through Linksys Connect. To learn how to reconfigure your router with Linksys Connect, click here.
How do I set up a used Linksys router?
QUICK TIP: To reconfigure a previously used router, reset the router to factory defaults. To do this, press and hold the Reset button of your router for 10 seconds. The Reset button is usually located at the back of the router. Connect the computer to the Cable modem using an Ethernet cable.
How do I connect to Wi-Fi after resetting my router?
How to configure your Router after Reset?
- Launch any of your favorite browsers.
- Type in the address 192.168.0.1 in the address bar.
- Enter the user name and password.
- When you log in to the router for the first time, you will be prompted to change it.
- Enter the Quick Setup option.
Can’t connect to Linksys router after Reset?
After pressing the Reset button, unplug and re-plug the router’s power adapter. NOTE: The Power LED of the router will keep on blinking for a few seconds after resetting as it is still trying to stabilize. However, if the Power light still isn’t solid after a minute, powercycle the router.
What happens when you reset your router to factory settings?
Router reset will wipe out all of your customized settings. Router username and password will be reset to factory default values as shown on the router label. Personalized Wi-Fi settings will be deleted, including the Wi-Fi name and password you created.
How do I Reset my Linksys router?
This wikiHow teaches you how to reset a Linksys router using the “Reset” button or the web-based setup page. Power off your computer. Unplug your router. Locate the small button labeled Reset. It’s an insert button that’s typically on the back of the router. Straighten a paper clip. You will use this to press the reset button.
How do I Reset my wireless router to factory settings?
Using the Reset Button Power off your computer. Unplug your router. Wait 60 seconds and plug it back in. Locate the small button labeled Reset. It’s an insert button that’s typically on the back of the router. Straighten a paper clip. You will use this to press the reset button. Press and hold the “Reset” button.
How do I Reset my Netgear router?
Unplug your router. Locate the small button labeled Reset. It’s an insert button that’s typically on the back of the router. Straighten a paper clip. You will use this to press the reset button. Press and hold the “Reset” button. The “Power” light should blink while you’re holding the button. Newer models should reset after 10 seconds.
What will happen if I Reset my router?
Resetting your router will erase your configuration. If you have previously opened ports for gaming, they will be blocked again. This will also wipe out any wireless settings or other adjustments, including the password if you’ve set a non-default one.