What is ErP in Gigabyte motherboard?

The ErP (Energy-related Products) Directive is part of the European Union’s new environment regulations concerning the increased proliferation of electronic devices and the impact these devices are having on the environment.

What does ErP Ready mean on a motherboard?

The function of “ErP ready” is to reduce your computer’s power consumption when powered down to below 1 watt. It deactivates stuff like wake on lan and other wake functions, so if you need that, don’t enable it, otherwise it can’t hurt.

What is ErP S4 and S5?

The only difference between states S4 and S5 is that the computer can restart from the hibernate file in state S4, while restarting from state S5 requires rebooting the system. State S5 has the following characteristics: Power consumption. Off, except for trickle current to devices such as the power button.

Where is ErP in BIOS Asus?

In the BIOS under ADVANCED>APM there is a ErP/EuP setting. This is the answer. When I enabled ErP S5 and powered off ALL LEDs were off.

What is ErP mode configuration?

What does ErP Mean? ErP mode is another name for a state of BIOS power management features that instructs the motherboard to turn off power to all system components, including USB and Ethernet ports meaning your connected devices will not charge while in a low power state.

What does enabling ErP do?

ErP Support determines whether to let the system consume less than 1W of power in S5 (shutdown) state. When the setting is enabled, the following four functions will become unavailable: PME Event Wake Up, Power On By Mouse, Power On By Keyboard, and Wake On LAN.

What is ErP Lot 3 support?

What is S5 mode?

Soft Off state (S5) The soft off state is when the system fully shuts down without a hibernation file. A full shutdown (S5) occurs when a system restart is requested (or an application calls a shutdown API).

What is ErP model?

Definition of enterprise resource planning (ERP) Enterprise resource planning (ERP) refers to a type of software that organizations use to manage day-to-day business activities such as accounting, procurement, project management, risk management and compliance, and supply chain operations.

What is above 4G decoding in BIOS?

Answer. The definition of “Above 4G decoding” is to allow the user to enable or disable memory mapped I/O for a 64-bit PCIe device to 4GB or greater address space. Please enable this function when using multiple graphics cards for cryptocurrency mining.

What is EuP mode?

Energy-using Products (EuP) is a directive designed to improve energy efficiency of electrical devices, reduce use of hazardous substances, and improve environment-friendliness of the product.

What is S3 mode?

S3 – Standby RAM maintains power, refreshes slowly. Power supply reduces power. This level might be referred to as “Save to RAM.” Windows enters this level when in standby.

What is ERP mode in a BIOS?

Without unplugging electronic devices, the shutdown state is the lowest rate of power consumption possible, and ErP mode, particularly when used as part of an ErP ready BIOS is part of a standard created to standardize the amount of power used in an “off” state.

How much energy does an ERP ready BIOS consume?

The “ Energy-related Products ” directive has specific provisions that state an ERP ready BIOS should consume less than 0.5W of energy in the Sleep (S3) or Shutdown (S5) state. This and other BIOS power settings can be adjusted in your UEFI or BIOS setup to best suit your power preferences or green initiatives.

What is ererp mode on a motherboard?

ERP mode is another name for a special mode of low power instructions that the motherboard uses to ensure it complies with a set of green initiatives that originated from the European Union.

How much power does the eup/ERP function consume?

The EuP/ErP feature in our system follows ErP Lot 6 2013 compliant which requires a PC system should not consume more than 0.5 W during “off state” or “standby.” In other words, this function only works when system is shut down or in system sleep mode (S3) and the power consumption should be less than 0.5 W.