How do I reset my Schlage CO 200?

Resetting a CO200 / CO250 Series Lock back to Factory Default…

1. Press and hold the Schlage button.
2. After confirmation signals, release the Schlage button.
3. Rotate the mechanical key within 10 seconds and hold.

How do I reset my Schlage co100?

Press and release the Schlage button three (3) times within 10 seconds of the beeps and blinks at step 4. One beep will sound and one red blink will occur with each press. 7. The Schlage button will light green for one second and a one-second beep will sound, indicating that the lock has been reset.

How do you change the code on a Schlage Lock?

To change the six-digit programming code to one of your own choosing:

1. Enter the existing six-digit code.
2. Press the “Schlage” and then the “3” keys.
3. When three orange flashes and three beeps occur, enter a new six-digit code.
4. When three orange flashed and three beeps occur again, reenter the same new six-digit code.

How do you change the code on a Schlage Lock without code?

So first how to Reset Schlage Keypad lock?

1. Disconnect the batteries.
2. Press and hold the Outside Schlage Button.
3. While holding the Outside Schlage Button, Reconnect the batteries.
4. Release the Outside Schlage Button.
5. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User.

What is the programming code for Schlage co-200?

CO-200 Offl ine Lock User Guide MANUAL LOCK PROGRAMMING Left LED Right LED TIPS The Schlage button has two different LEDs, one on the left and one on the right. All locks have a default programming code of 97531 and “…

Is the co-200 the same as the ct5000?

CO-200 can work in the same offline system as AD-200, CO-220 and CT5000. They can be manually programmed for basic use or managed with PC-based Schlage Express™ software. Select Software Alliance members also offer access control solutions for the CO-200 with added capability that can include lock schedules and audits.

Is the Schlage co-200 compatible with ct5000?

CO-200 can work in the same offline system as AD-200, CO-220 and CT5000. They can be manually programmed for basic use or managed with PC-based Schlage Express™ software.

How many people can use Schlage co-200 lock?

More importantly, this lock offers up to 2000 users with audit capability to note the who, where and when of building or room access. CO-200 can work in the same offline system as AD-200, CO-220 and CT5000. They can be manually programmed for basic use or managed with PC-based Schlage Express™ software.