Why is my 4G LTE connection not working?

Why is my 4G LTE connection not working?

First, toggle on and off the Airplane mode. On most Android phones, you can toggle on/off the airplane mode from the Quick Settings panel. If not, you may go to Settings → Mobile Networks → Airplane mode. Turn on Airplane mode for about 30 seconds or more. Turn it off again to reconnect your network.

Why can’t I get 4G on my Samsung?

To use 4G on our network, you’ll need to make sure you’ve got the latest software version available for your phone. If our 4G network isn’t available in your location yet, you can check our list to see if we’re bringing 4G to your area. You should also make sure that 4G is enabled on your phone.

Why is my AT cellular data not working?

If you haven’t already, please reset your network settings, go to Settings App> General > Reset > Reset Network Settings to refresh your network connection. Check your wireless usage to confirm data on your plan. Also, check out your AT Prepaid Coverage for connection and signal strength.

Why is my LTE so slow AT?

We may temporarily slow your speed at any time if our network is busy. We may also slow it after you use more than 50GB or 22GB of data in a single bill period. For those plans, we’ll text you when you’ve used 37.5GB or 16.5GB (which are 75% of 50GB or 22GB).

Why is my mobile data not working on my Samsung?

Remove and Re-Insert Your SIM Card Before rebooting, turn on Airplane Mode. Wait for 30 seconds, then turn Airplane Mode off. If you still don’t have data, turn airplane mode back on, turn your phone off, wait for a minute, turn your phone back on, turn airplane mode off, wait for 30 seconds, then turn mobile data on.

Why would LTE not work?

LTE not working on your phone. It could be a phone fault, software fault or even a network fault. If your data speed remains the same, it could be a network issue or upgrade. If your data speed drops, it could be a network outage or phone fault.

How do I enable 4G on my Samsung?

Activate 4G on Samsung To activate LTE 4G on a Samsung phone, go to the Settings menu, then tap on the Connections selection. Scroll down to Mobile Networks, tap on it and then tap on the Network Mode. You should see LTE network selections and just pick the one that is best suited for your wireless network.

Why does my phone say LTE instead of 4G?

In laymans terms, the difference between 4G and LTE is that 4G is faster than LTE. The reason for this is that 4G meets the technical standards designated for it whereas LTE data transfer speed standard is merely a stopgap measure standard devised until actual 4G speed is realized.

Does AT support 4G LTE?

With 4G Long Term Evolution (LTE 2) technology, we can meet your demands to access a variety of content over our mobile network. We use a variety of technologies and frequencies to support our network. Our 4G LTE network is composed of the following bands: 700 MHz: Bands .

Why is LTE not working?

If your mobile data is giving you trouble, one of the first things you should try is turning airplane mode on and off. Paths can differ slightly depending your Android version and phone manufacturer, but you can usually enable Airplane mode by going to Settings > Wireless & networks > Airplane mode.

How do I get around AT throttling?

AT has been known for throttling the bandwidth of its customers, even on unlimited data plans that normally shouldn’t have such limitations. If you want to easily stop these limitations, lift bandwidth restrictions, and increase your Internet speed, use a VPN.

How do you tell if AT is throttling you?

If your download speed is significantly lower than the speed stated in your plan, you might be being throttled. Likewise, if your speed test results are significantly higher than what you’re getting while torrenting, downloading, or streaming, then those specific activities might be throttled.