# What is the difference between point and counterpoint?

## What is the difference between point and counterpoint?

As nouns the difference between point and counterpoint is that point is a discrete division of something while counterpoint is (music) a melody added to an existing one, especially one added to provide harmony whilst each retains its simultaneous identity; a composition consisting of such contrapuntal melodies.

What is a good sentence for data?

Data sentence examples. You have some access to data bases that could be helpful. The machine will figure this out as it collects more data and incorporates more variables, and then experiments on people to see which combinations of factors work the best. I can’t pull the data off.

### How do you use datum in a sentence?

Datum in a Sentence ?Only having one datum from my research was not enough to convince anyone, so I would need to gather more. Each datum contributed to revealing the answer to a problem the people faced. “ While conducting my study, I needed one more piece of datum to prove my theory.

What does datum mean in English?

datum in American English 1. something known or assumed; information from which conclusions can be inferred. see also data. 2. a real or assumed thing, used as a basis for calculations or measurements, as a level ( also datum plane) from which elevations and depths are measured in surveying.

#### What is another word for datum?

What is another word for datum?detailparticularpointspecificfactnicetyparticularitydata pointitemelement146

How do you define datum?

A datum is a plane, a straight line, or a point that is used as a reference when processing a material or measuring the dimensions of a target. ISO Definition. Types of Datums.

## How do you identify a datum?

On a surface If it is on one side of a rectangular object like a box, the datum surface is only the side where the symbol is shown. However if the part is round like a cylinder, the datum would be the entire surface of the cylinder.

What are Datum Features?

A datum feature is a part feature (or FOS), that contacts a datum during measurement. A datum is a theoretically exact plane (or axis or center-plane), from which dimensional measurement should be made. During measurement, the datum feature will contact the simulated datum which in this case is a surface plate.

### What is a datum point?

In engineering and drafting, a datum is a reference point, surface, or axis on an object against which measurements are made. These are then referred to by one or more ‘datum references’ which indicate measurements that should be made with respect to the corresponding datum feature .

How do you get a datum point?

Creating a datum point by projecting a point onto a face. Select a point on the model and an edge or datum axis on which to project the point. Abaqus/CAE creates the datum point where the edge or datum axis intersects a line that is normal to it and passing through the selected point, as shown in Figure 7.

#### Why do we use a datum?

A datum is a point, line, or surface from which dimensions are taken. It is the place to start. This is important to note when marking out a job. A datum is used to reduce errors when marking out, and measuring by reducing the accumulation of errors.