How do you disassemble a Glock?

Read your Glock owners manual. Field strip your Glock. You will need a Glock disassembly tool or a 3/32” punch, to take apart your pistol completely. Using a disassembly tool push down the polymer spacer sleeve as shown. Hold the sleeve down for the next step.

How do you safely field strip a Glock?

Follow this guide to safely field strip your Glock in just a few minutes. Point the pistol in a safe direction. Make sure that the pistol is pointed in a direction where any accidental discharge cannot cause physical harm to you or anyone else. Keep your finger away from the trigger, and outside of the guard.

How do I change the backstraps and grips on my Glock?

If you have a Glock Gen 4, or a Glock Gen 5, this is also the pin that you can remove to change your backstraps and grips. The trigger assembly at this point should just lift out of the frame.

How do you remove the trigger from a Glock trigger?

Holding the trigger housing in one hand, and the trigger bar in the other; pull the trigger bar straight back toward the ejector end of the trigger housing, and then rotate the bar out and away from the housing. This will disconnect the trigger from the trigger housing, now remove the trigger bar from the spring.

The frame is slightly more complex, but if you’re at all versed with the real Glock teardown, some of the disassembly steps will be familiar. Starting with the locking block, press the two pins out from the right side of the frame. The slide release and spring will pop free, as will the trigger bar return spring.

How much does the elite force Glock cost?

Average retail price for the Elite Force Glock is $169 with spare mags clocking in around $44. This puts it slightly north of a comparable new Tokyo Marui Glock replica in cost.

Is the EF G19 a real Glock?

This particular replica is reputedly a true 1:1 of the real steel Gen. 3 Glock 19 and it certainly feels that way. Unlike the TM G17 models, which are actually modeled around the larger G21 in size, the EF G19 actually fits a G19 holster perfectly.

How do you remove the serial number on a Glock?

The right side of the hood is engraved with Glock trades and a serial number. In stock configuration, this comes with a threaded plastic orange tip that is also glued in place. This can be removed by boiling the barrel for several minutes and then twisting the cap off with some pliers.