How do I troubleshoot my Maytag Neptune dryer?

How to Diagnose Maytag Neptune Dryer Problems

1. Ensure that the dryer’s door is latched shut and that the power cord is plugged into an electrical outlet.
2. Make sure that the “Air Fluff” button on the dryer’s touchscreen has not been selected if the dryer fails to produce heat.

Why is my Maytag not drying?

A clogged vent could also be why your dryer is not drying. Maytag recommends using a professional service to clean the vent system.

How do I reset my Maytag front load dryer?

If the dryer needs to be reset simply because the cycle needs to be changed, stopped or altered, press “Power/Cancel” once to cancel the current cycle. Select the new desired cycle, followed by any modifiers and cycle options. Then press “Start/Pause” to begin the new cycle.

Where is the thermal fuse located on a Maytag Neptune dryer?

exhaust duct
Dryer thermal fuse (or thermal limiter). This fuse is located on the exhaust duct. If the dryer overheats, the thermal fuse opens to cut off power to the dryer. The thermal fuse cannot be reset–if the thermal fuse is open, it must be replaced.

How do you know if your dryer sensor is bad?

If your Whirlpool dryer leaves clothes damp, you may have a defective moisture sensor. A common symptom of a failed sensor is a Whirlpool dryer not drying all the way. The dryer moisture sensor is designed to detect the moisture level in the dryer and adjust the dry cycle time accordingly.

How do you test a Maytag moisture sensor?

How to Test a Maytag Dryer Moisture Sensor

1. Make sure the dryer is on the “auto-dry” setting.
2. Place several damp articles of clothing in the dryer and start a regular drying cycle.
3. If the dryer continues running after clothes are dry or stops when clothes are still damp, the sensors may not be functioning properly.