How do I fix the white screen of death on my iPod nano?
May be too hot or cold(device).
- warm it up for 5-10 min.(cover it with something warm)
- lock and unlock switch 2 times. Hold same time (home+select)
- when it restarts(when screen turns black, immediately hold the Play/Pause button for +10 seconds.
Why is my iPod nano screen white?
This article says that, if your iPod nano’s display shows a white screen, to put the iPod into disk mode and restore using iTunes: Try putting the iPod into disk mode: While the device is in disk mode, sync it to iTunes and try to restore.
What does it mean when your iPod screen goes white?
On one hand, when the device is dropped, the cable connector from the screen to the motherboard can break or loose, then a white screen may appear on your iPod touch. On the other hand, a hardware failure can also result in a similar issue on the iPod touch.
How do you fix a white screen on an iPod touch 4th generation?
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or battery symbol appears. If the battery symbol appears, continue to charge iPod touch until it is fully charged.
How do you reset a iPod nano?
Force restart your iPod nano Press and hold both the Sleep/Wake and Home button until the screen turns off. Then wait a few seconds for your device to restart. Still need help? Plug your iPod into power, then try again.
What do you do when your iPod nano wont turn on?
- If your screen is black or frozen, you might need to force restart your device.
- Press and hold both the Sleep/Wake and Volume Down buttons for at least ten seconds, until you see the Apple logo.
- On an iPod touch: Press and hold both the Sleep/Wake and Home buttons for at least ten seconds, until you see the Apple logo.
What is White Screen of Death?
True to its name, the WordPress White Screen of Death (also known as “WSoD”) occurs when, instead of the web page you’re trying to access, you’re faced with a blank white screen in its place. The WordPress White Screen of Death is almost always caused by PHP code errors or memory limit exhaustion.
How do I fix the white lines on my iPod?
Answer: A: You can try a hard reset. Press the power button and the home button at the same time and hold it until the Apple appears. If that does not fix it, then if your in reach of an Apple store make an appointment for the Genius bar for them to look at it and discuss your options.
How do you reset an iPod nano 4th generation?
Why is my iPod nano frozen?
Reset an iPod nano 6th Gen. Press and hold the Sleep button and the Volume Down button. Hold both buttons for at least eight seconds. Continue holding until the Apple logo appears on the on the screen. You may need to repeat this process in order to successfully reset.
Why is the screen on my iPod Nano 7G white?
Just try to power up my ipod nano 7G and the screen is just white. Still playing but cant see a thing. holding the power and select button simultaneously does nothing. Any idea how I can fix this?
What should I do if my iPod screen is white?
Turn the Hold switch on, then back to off. Press and hold the Menu and Select buttons for 10 seconds (until the Apple logo appears). You may need to repeat the reset several times. If the reset doesn’t help, then put the iPod into forced disk mode.
How do you reset an Apple iPod Nano?
Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds. When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode. Welcome to Apple Support Communities!
How do I put my iPod Nano into Disk Mode?
To put the iPod into disk mode, follow these steps: Before placing the iPod into Disk Mode, verify that it has a charge. Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.