How do I fix my Samsung Galaxy S4 no signal?

How do I fix my Samsung Galaxy S4 no signal?

  1. Turn the device off completely.
  2. Press and hold the Power button.
  3. Once the Samsung Galaxy S4 logo appears on the screen, release the Power button.
  4. As soon as you release the Power button, press and hold the Volume Down key.
  5. Continue holding the Volume Down key until the phone has completed the reboot process.

How do I fix my Samsung Galaxy no signal?

How to Fix “No Service and Signal” on Samsung and Android

  1. Restart Your Android or Samsung Device.
  2. Toggle Airplane Mode.
  3. Manually Select Network Operators.
  4. Run a Ping Test With Service Mode.
  5. Double-Check Your Sim Card.
  6. Restore Factory Settings.
  7. 5 Apps to Spice Up Your Selfie.

How can I boost the signal on my Galaxy S4?

How to strengthen the signal in SAMSUNG I9500 Galaxy S4?

  1. Go to Settings.
  2. Choose the option More Networks in the Connection settings.
  3. Then tap on Mobile Networks.
  4. Find the Network mode.
  5. Change the Network from 3G to 2G.

How do I reset network settings on Galaxy S4?

Samsung Galaxy Tab S4 – Reset Network Settings

  1. From a Home screen, swipe up or down to access all apps.
  2. Navigate: Settings. > General management > Reset.
  3. Tap Reset network settings.
  4. Review the info then tap Reset settings. If presented, enter the current PIN, password or pattern.
  5. Tap Reset.

How can I increase my Samsung signal strength?

How to boost signal strength of your smartphone

  1. Remove any type of cover, case or hand blocking the antenna of the smartphone.
  2. Remove obstructions between your smartphone and the cell tower.
  3. Conserve your cellphone battery.
  4. Check your SIM card for any damage or dust.
  5. Switch back to 2G or 3G network.

Why is my Samsung s4 not connecting to WIFI?

Workarounds: Most people report that toggling the Wi-Fi switch in quick settings, or turning your smartphone and/or router off and on again, temporarily solves the issue. Potential solutions: Go into Settings > Connections and tap Wi-Fi. Then tap Menu and make sure Keep Wi-Fi on during sleep is set to Always.

How do I enable 4G LTE on my Galaxy s4?

Turning 4G on or off.

  1. On the homescreen, tap Apps.
  2. Tap Settings.
  3. Tap More networks.
  4. Tap Mobile networks.
  5. Tap Network mode.
  6. If you want to use 4G, make sure LTE/WCDMA/GSM is enabled. If you just want to connect to our 3G network, make sure WCDMA/GSM is enabled.

How do I fix my Samsung m31 network problem?

Swipe up

  1. Swipe up.
  2. Select Settings.
  3. Select Connections.
  4. Select Mobile networks.
  5. Select Access Point Names.
  6. Select the Menu button.
  7. Select Reset to default.
  8. Select Reset. Your phone will reset to default Internet and MMS settings. Network problems should be solved at this point. Remember to turn off your Wi-Fi before testing.

What to do if your Samsung Galaxy S4 has no signal?

Wait a few seconds for the device to connect to the network. Place a test call to your Voicemail. We have an email that we used to receive questions, problems or suggestions from our readers.

What does the bar mean on my Samsung Galaxy S4?

When you see it, it means your device is connected to a WiFi network. The bars indicate how strong the connection is. This indicates that Bluetooth is enabled on your device. When Bluetooth is turned on, your device can connect to other Bluetooth-enabled devices as long as they are paired with each other. This indicates that GPS is turned on.

Why does my Samsung Galaxy S4 have a sideways icon?

Since it is not in the manual, the sideways Z icon is likely from an app that you downloaded. Some Android apps will leave icons in your notifications bar while they’re running. I am losing signal and internet at my home location which always had strong of both, my phone also thinks I am located internationally? You need to restart your device.

Why is there no signal on my Samsung phone?

If you’re here and stuck with an Android or Samsung device displaying “No Service and Signal,” you’re not alone. This loss of service limits even the most basic of functions, and can be caused by a variety of issues, including hardware problems. But for every problem, uBreakiFix has a solution.