Is stock 4runner suspension good?
For my use, the stock suspension worked great. It just didn’t look great. I wanted a more level truck, and Eibach struts were the best compromise for me. Could have done front spacers, I suppose, to keep more of the factory ride characteristics.
Is icon suspension a good brand?
Icon is a good brand, but it depends what you want out of them. If you do any fast off-roading you don’t want their rear shocks. Mine over-heated to the point that the metal on the shock body distorted in color and shape. Coilovers refer to adjustable aftermarket front suspension components…
Where are icon lift kits made?
the USA
ICON Vehicle Dynamics products are all proudly made in the USA at our Southern California-based facility by a team of passionate off-road enthusiasts.
How many inches should I lift my 4Runner?
It is important to make sure that you are being safe and making sure your 4Runner will run smoothly. You should not lift your 4Runner higher than 3 inches because any higher will cause damage to your car.
Is 4Runner TRD Pro lifted?
The 2020 Toyota 4Runner TRD Pro’s comfortable ride This gives the TRD Pro a 1” lift over base 4Runners, Gear Patrol reports, and a 9.6” ground clearance, Cars.com reports.
What do suspension stages mean?
I’ll update this post with more information, but so far the best I can figure is: Stage 1: front coilover, rear shock and spring. Stage 2: includes Stage 1, plus front UCA’s (upper control arms) Stage 3: includes Stage 2, plus front LCA’s (lower control arms), bypass shocks, and jounce shocks.
Is Icon better than Fox?
Icon is digressive, Fox is progressive. Plus, you have 2.5” shocks on both front and rear with the Icon kit, which is a benefit with these beefy trucks. They’ll run cooler and not overheat as quick as the 2.0 rears on the Fox kit.
How long has icon suspension been around?
Beginning in 2008, ICON has been developing and producing suspension products that redefine the limitations of what aftermarket suspensions systems were thought to be and brought those limitations to the point where they became almost non-existent.
Why you shouldn’t lift your 4Runner?
Most 4Runner owners do not lift their vehicle more than 1.25 inches. Lifting it higher will negatively impact steering, gas mileage, and center of gravity. However, if the lift is to increase clearance for heavy off-roading, there are lift kits that will lift higher than 1.25 inches.
What’s the difference between suspension on a 4Runner and an icon?
Stock 5th Gen 4Runner Suspension Ride Quality on the Icon Stage 2 Suspension Vs. Stock 4Runner Suspension We had a question come in from an owner with KDSS on the difference between the Icon stage 2 suspension Vs. stock shocks.
Is there a free suspension lift for 4Runners?
To get full-access, you need to register for a FREE account . Discussion in ‘ 5th Gen 4Runners (2010+) ‘ started by Rguest3, May 21, 2018 . Lakewood Ranch. FL I am narrowing down my choices for a Suspension lift for a 2018 4Runner without KDSS.
What kind of shin guards do I need for an icon 4Runner?
Icon recommends running the #56100 shock shin guards or any other shock boot to reduce the chance of shock damage. The front coilover shocks of the IVD system are located in a “vulnerable position” that may allow debris to make direct contact with the shock shaft.
How does the icon Stage 2 suspension work?
Even though this kit is supposed to be tuned, it doesn’t feel like that after the install. After you install your Icon Stage 2, your front passenger will sit about 3/4 of an inch lower than the driver. And, IVD does not provide a spanner wrench to adjust your suspension after you install it. Nor do they tell you this.