How fast will a canoe go with a trolling motor?

4-6mph
Most electric trolling motors will allow a canoe to travel at 4-6mph. Anything faster than that would be a little too much for a typical canoe to handle. The combination of your motor’s ability and the battery that you use with it will determine how fast your canoe will travel and how long the battery will last.

Can you use a trolling motor on a canoe?

A 30″ electric trolling motor shaft is perfect for most canoes. This will allow you to get the motor and propeller far enough into the water to use the full thrust of the engine. But it will also give you some extra shaft length to put the motor down deeper in the water in case you’re in choppy, bucking water.

How fast does a 55lb trolling motor go on a kayak?

5 miles per hour
Assuming perfect riding conditions, the use of the best fuel i.e. the distillate marine diesel, and moderate load, 55-pound trolling motors are likely to attain a maximum speed of only 5 miles per hour.

How much thrust do I need for a canoe?

Canoe or Kayak Size Most canoes only need a motor with a 55-lb thrust. This will give you enough power to haul you, your boat, and all your gear across a lake. In some cases, you may be able to get by with a smaller motor, too.

What size battery do I need for a trolling motor?

Most trolling motor batteries fail due to lack of proper charging. We suggest selecting a 12 volt deep cycle marine battery with at least a 110 amp hour rating, usually a group 27 size battery. The higher the amp hour rating, the more run time you will receive.

How long will a battery last with a trolling motor?

Almost 5 hours doesn’t seem too bad, but that is really a max runtime in ideal conditions. Reality is likely to be less. If the battery is old, damaged or not fully charged then you will not get the rated amp hours from it, reducing your runtime. Significant cold or hot weather will also reduce your runtime.

Can you have too much thrust on a trolling motor?

You can never have too much thrust and go with a variable speed. Not only is it more useful it also helps battery life. The one place that many people try to save money is on the electric trolling only to regret it. Go with as much as your pocket book allows.

How many horsepower is 55 lbs of thrust?

If you’re getting the full 55 lbf of thrust at this speed, then your hull has 55 lbf total resistance at this speed. 55 lbf = 0.245 kN, so (0.245 kN)*(1 m/s) = 0.245 kNm/s = 0.245 kW. That’s about 1/3 hp.

How deep should a trolling motor be in the water?

A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades. In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.

What size battery do I need for a 12V trolling motor?

How fast can I go with a trolling motor?

The max speed of a trolling motor is designed to go a top speed of 5 mph (miles per hour), and no more than that. The reason we have to think about thrust, is because the bigger your boat, the more thrust you will need to move it at 5 mph. It is very important that even though you are in a kayak,…

Can I put a trolling motor on a kayak?

Yes, you can install a trolling motor on an inflatable kayak as long as you properly mount it. Again, there are several trolling motor mounts that you can purchase that are specifically designed for inflatable kayaks. There are also plenty of DIY YouTube videos that can help you make your own custom mount.

What size trolling motor on a kayak?

The bigger the size of your kayak, the more powerful your trolling motor must be. Since most trolling motors have a 12 V motor, you may want to go with a more powerful 24 V or even 36 V motor depending on the size of your kayak.

What is a kayak trolling motor?

Adding a trolling motor to your kayak gives your arms a break and also frees up your hands so you can cast a fishing line or get some great photos of nature. Engines for kayaks are called trolling motors. They attach temporarily to the back of your kayak and can be removed when you don’t need it.