How do I factory reset my Avaya j179?

How do I factory reset my Avaya j179?

Press the softkey corresponding to Select, or press the line key adjacent to Administration. Enter the default pasword of 2 7 2 3 8 [C R A F T], and press the softkey corresponding to Enter, or press the OK button in the center of the navigation cluster. Scroll down until Reset to defaults is seen and highlighted.

How do I reset my Avaya 1616?

Press the Mute key followed with 25327# Then clear all settings by pressing the # (POUND) on the dial then dial # (POUND) again and the phone will reboot to factory default.

How do I reset my Avaya 1616 IP phone?

How do you reset an Avaya desk phone?

How to Reset and Clear Avaya 9608 IP Phone Settings

  1. Reboot the phone.
  2. Press the * button to program when it prompts as the phone is starting up.
  3. Press mute, then type in 27238 # (CRAFT).
  4. A menu will appear, scroll down to Clear and press Start.
  5. The display will show “Press Clear again to confirm”.

How do I unlock my Avaya 1616 phone?

Unlocking the Phone

  1. Press the Unlock soft key.
  2. Enter your login code. • If you have forgotten the login code, your system administrator needs to reset it via the full system configuration. You can then unlock the phone using the new code.
  3. Press the Done soft key.

How do I reset my HiSense phone?

Restore with hard reset or Recovery mode HiSense U989 Pro

  1. 1- First turn off your HiSense U989 Pro completely.
  2. 2- Keep holding on volume down and power keys together for a few seconds in your HiSense U989 Pro.
  3. 3- When the HiSense logo is displayed, release the buttons.

How to reset the power to the avaya-4610 IP telephone?

To reset the power to the avaya-4610 IP telephone, unplug the phone then plug it back in. Press [*] asterisk (sounds a confirmation tone) to reset the phone without resetting any assigned values. Use the given options only if the phone has programmed static values.

How do I reset a 5610sw or 5621sw?

Applies to 5610SW, 5621SW. A reset is like a soft reset. It wipes out the IP address, extension number, speed-dial, call logs, etc. Press the * key when your phone is booting up to program it.

How do I Reset my Avaya 9608 to default settings?

Reset Avaya 9608 Reboot the phone.Press the * button to program when it prompts as the phone is starting up.Press mute, then type in 27238 # (CRAFT).A menu will appear, scroll down to Clear and press Start.The display will show “Press Clear again to confirm” Was this post helpful?

How do I Reset my Phone to factory default settings?

Press the * key when your phone is booting up to program it. Press the # key multiple times to skip through all the defaults until you get to the screen that says “Enter Command.” Press the # key to confirm the reset. You can also do this if the phone is already on by pressing the MUTE key and then typing CLEAR #