What is the best hydraulic hose crimping machine?

Best Hydraulic Hose Crimper

IBOSAD Hydraulic Hose Crimper.
iGeelee Hydraulic Hose Crimper.
Mophorn 71500 Hydraulic Hose Crimper.
SHZOND Hydraulic Hose Crimper.
IWISS Hydraulic Crimper.
Mophorn 7842A Hydraulic Hose Crimper.
ACTECMAX Hydraulic Hose Crimper.
Fekuar Hydraulic Hose Crimper.

Can you over crimp a hydraulic hose?

You could crimp it from 1.027 to 1.043. Anywhere within that range, the hose is still valid, but you don’t know where you’re at. You either risk over-crimping and restricting flow or damaging the braiding on the hose, or you risk it not being crimped enough and blowing off a hose end.

What is a hydraulic hose crimper?

A hydraulic hose crimper uses a pump system that creates a tight grip on the end of the hose. This crimps the hose end fitting onto the hose. Some crimpers have a handle that users move to tighten or loosen the crimper. Other hydraulic hose crimpers use electronic controls so the technician can adjust the pressure.

What are the safety rules in using hydraulic crimper?

To avoid injury when using hydraulic equipment, observe the following precautions:  DO NOT modify the crimping equipment in any way.  USE ONLY dies, terminals, and wire specified for the head.  DO NOT perform repairs other than those specified in the instructional material supplied with the equipment.

How do hydraulic hose crimpers work?

The collet on the hydraulic crimper is essentially an annular hydraulic cylinder. In some cases, two cylinders push on such an annular ring. The force created from the cylinders pushes either the collets or dies, forcing the latter to close upon the hose end with high force.

How does a hose crimper work?

Push the hydraulic hose into the crimping machine and through the crimp die until the hose’s fitting appears above the crimp die. The crimping machine then pushes the collar that compresses the die and the machine will stop once the collar is at the bottom of the crimp die.

How do you take care of crimping pliers?

Protect your crimping pliers from rain, snow and excessive heat. This will prevent problems such as rust and deformation of the tool. Maintain your crimping pliers according to provided instructions and oil them once in a while to increase lubrication and ease of use.

What precautions one need to take while crimping?

[Cautions] (1) Take care to prevent cutting of wire conductors, uneven stripping length and insufficient cutting of the insulation. (2) Ensure the strands do not spray come apart. (3) Do not excessively twist the strands. Crimping height is one of the important quality management items on crimping process.

How do you crimp a hydraulic hose fitting?

How to Crimp a Hydraulic Hose