Are pegboards universal?

Pegboard hole spacing is standardized so the hooks will fit. What is NOT standardized is the hole size. There are 1/8; 3/16; and 1/4 pegboards out there. These hooks will fit the 1/4 and probably the 3/16 holes.

What size is pegboard?

What size are pegboard holes? Pegboard holes come in two sizes: either the larger 9/32 inch holes or the smaller 3/16 inch holes. The larger 9/32 holes are for accommodating 1/4 inch peg hooks but can also hold the smaller 1/8 inch peg hooks.

How do you hang a bin on a pegboard?

To hang them, drill a hole in the side of the plastic container just like we did with the can. If you want to use a lid with it, make sure the hole is far enough down the side of the container that the hook will fit through and the lid will still close. Then hang your container on the pegboard with a standard hook.

Can you paint pegboard?

When painting pegboard, we would recommend using a paint gun (or spray paint) over rollers. When using rollers, it will be much easier to get the pegboard holes clogged up, which makes it harder to fill your board with all your pegboard accessories once it’s painted. Ideally, you’ll use a professional paint sprayer.

What can I use instead of pegboard?

Plywood. Bolt plywood to the wall where you need to hang items for easy access. Sheets of plywood can be cut to any size and bolted to the wall to form an inexpensive pegboard alternative. Tools are then hung on nails instead of hooks.

Are all pegboards the same?

Pegboard Specs All pegboard has holes with 1-in. spacing, but there are two thicknesses and two hole sizes available. Small hole pegboard is usually 1/8-in. -thick hardboard with 3/16-in.

Why are pegboards so expensive?

Wood pegboards are the most expensive type of pegboard because they have a decorative look. Metal pegboards are usually made of aluminum or stainless steel. Because of how heavy these panels are, they’re strong enough to hold large tools.

What wood is used for a pegboard?

Pegboard is typically constructed from one of three materials: wood-based composite such as particleboard or MDF, solid wood or plywood or steel. The pegs are made from the same materials, while hooks used to mount tools or merchandise are made of metal.

What is the best paint for pegboard?

Instead, go for a solvent-based primer, such as Zinsser or XIM. Once your pegboard is primed and sealed off properly, you’re good to use your favorite water-based or non-water-based paint to finish off painting your pegboard.