Will a Fox spring fit Cane Creek?

The most versatile shock spring – will also fit Fox and Manitou coil shocks + some Marzocchi Roco shocks.

Are Cane Creek shocks good?

Although pricy, the Cane Creek DB Air CS is a premium rear shock for riders who want premium performance from their suspension. It’s a great way to make your bike stand out from the majority of others that are specced with Fox or RockShox suspension, but the bottom line is that it’s a notably great feeling rear shock.

How do you put SAG on a coil shock?

The difference between the two measurements is sag.

1. To increase sag, turn the preload adjuster counter-clockwise.
2. To decrease sag, turn the preload adjuster clockwise no more than two full turns.
3. To change to a higher or lower rate spring, see the Changing Coil Springs section below.

Does Cane Creek Spring fit Fox DHX2?

No spacer is needed to run a Cane Creek spring on a Fox DHX2 or DHX. You will need 1 spacer for each end of the spring, 2 in total.

What does preloading a spring do?

Spring preload pushes the tire down and makes the suspension work. On big bumps at speed the spring preload pushes the tires down to better follow the terrain and make a smoother, more controlled ride. Under articulation the spring preload increases tire contract pressure improving traction.

How do you set preload on coil shocks?

How do you preload a coil shock?

If you have a coil shock, you can adjust your sag by adjusting the preload on the spring. The spring is preloaded by turning the collar that the spring butts up against—by turning that collar, you’re compressing the spring.

Can you fit a rockshox spring on a Fox shock?

Also available to fit a 38mm or 1/2″ ID spring (like MRP or Rockshox) to 35mm (Fox) and 36mm (CCDB, Bos, etc) shocks. If you have a Fox Shock (35mm) then using the 35/36mm Adaptor you are able to fit 36mm ID springs such as Cane Creek, Ohlins, Bos etc.