How do I reset my Beko xl9 washing machine?

If your Beko washing machine won’t start, there’s an easy reset process to follow:

1. Locate the start, pause and cancel buttons.
2. Press them all down at the same time for around 3-5 seconds.
3. Your machine should now be reset.

How do you diagnose a washing machine problem?

Washer Troubleshooting Guide

1. Check that the washer is plugged in securely.
2. Check the circuit breaker or fuse box.
3. Test the outlet for current.
4. Check that the water supply valves are turned on.
5. Inspect the filter screens.
6. Test for overheating.
7. Test the water level switch.
8. Test the timer control.

How do you test a Beko washing machine?

How do I do a diagnostic check on Beko washing machine

1. Turn the appliance off with door shut.
2. Turn the dial to the position 6 and hold down a few seconds.
3. The next time you enter it should turn on all the lights now you the machine is in diagnostic mode.

Can you reset a Beko washing machine?

Try resetting the appliance by pressing and holding the start/pause/cancel button for three seconds.

How long do washing machines usually last?

The average lifespan of a washing machine is 11 years, according to HowStuffWorks.

What is the average life of a washing machine?

around 10 years
Washing machines, on average, last around 10 years, according to Consumer Reports. If your washer is reaching the threshold, or it’s been having some problems, here are some signs the end may be near.

Why does my Beko washing machine keep pausing?

If the water supplied to your Beko washing machine is too weak, this may cause the machine to stop mid-cycle. Wash the hose thoroughly in warm soapy water. The filter can now be removed from the inlet in the back of the machine.

What are the common faults of a Beko washing machine?

1 Faulty pressure switch: there is a pressure switch inside which tells the machine when the cycle is over. 2 Faulty interlock: if that doesn’t help, your interlock may be at fault. 3 Faulty hinges in a top loading washing machine: the hinges on your washing machine’s lid may have worn down.

Why does my Beko washer still have conditioner?

If your washing machine still has conditioner left in the dispenser drawer following a wash cycle, then there is likely to be an issue with the dispenser. In this video, BuySpares explain how to cure dispenser problems in a Beko washing machine.

How to repair a Beko washing machine WMB 7 Series?

7: both water valve are now activated and all 3 compartments will have water flowing in. 6: This is the full wash and heat test. Machine will start to fill to the correct water level and continue to heat and wash. 7: the machine will empty. the pump should drain the water away.

How do you turn the dial on a Beko washing machine?

To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later. When looking at the dial on a Beko washing machine treat it as a clock 1 to 12 as in picture. Start by turning the washing machine of with door shut.