How can I replace my PF Kit 1 brother?

How can I replace my PF Kit 1 brother?

Periodic maintenance replacement of the PF Kit 1 is not covered under the standard Brother warranty and cannot be installed by the customer. Or you can contact Brother Customer Service by calling 1-877-Brother (1-877-276-8437) Monday through Friday, excluding holidays.

How do I clear the message replace PF Kit 1?

7) The PF Kit life counter needs to be reset to clear the “Replace PF Kit” message. To do this, press the GO and + buttons at the same time until “Reset Parts Life” is displayed. Now press the + button until PF Kit 1 or 2 is displayed and press SET. The counter will now be reset.

What is a PF kit on a printer?

The PF Kit 1 (Paper Feeding Kit 1) is a periodic maintenance item and should be replaced as soon as possible to maintain optimum reliability. NOTE: The machine will continue to work with the message on the display. However, paper jams or other feed-related problems may occur more frequently if the kit is not replaced.

How do I remove the roller from my Brother printer?

FAQs & Troubleshooting

  1. Open the Top Cover (1) then the Front Cover (2) by pulling the Cover Release Lever (3) toward you.
  2. Press the tab on each side of the Pick-up roller cover toward the center of the cover (1) and then pull the cover down.
  3. Slide the Pick-up Roller (1) all the way to the right.

How do you change a fuser on a brother?

Follow the steps below:

  1. Press the Power button to turn off the printer.
  2. Open the Top Cover.
  3. Unscrew the two long screws as shown to release the Fusing unit from the printer.
  4. Remove the Fusing Unit from the printer by holding the handles on both sides.
  5. Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit.

What is a fuser on a Brother printer?

The fuser unit is a consumable item that requires periodic replacement. After you have printed approximately 100,000 pages (letter or A4 size paper), the message ‘Replace Parts Fuser Unit’ will appear on the LCD display. NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.

Can you replace rollers on Brother printer?

Those rollers are periodic replacement parts. We recommend that you call your dealer or Brother Customer Service if you need assistance replacing the Feed Roller.

How do you replace a feed roller?

Replace the Feed Roller

  1. Power the printer off.
  2. Remove paper Tray 1.
  3. Locate the Feed Rollers inside the printer, toward the back.
  4. Gently push down on the clip to unlock the roller and then pull the roller off.
  5. Repeat for the other roller.
  6. Set the old rollers aside for recycling.

Why is Brother printer out of stock everywhere?

COVID-19 has caused a delay in the overall production of technology related to the printing industry. For example, chips that power modern-day printers have experienced a major increase in demand. In turn, this has resulted in a global shortage as not enough chips are available to meet current needs.

How do you change a fuser kit?