What is glass fiber filter made of?

Glass fiber filter media is made from 100% micro-fine borosilicate glass fibers. Glass fiber filters are used where high flow rate and micron/sub-micron filtration is required. The filter media can be used for both liquid and air filtration.

What is cellulose filter media?

Cellulose (paper) filter media is an inconsistent filtration media that cannot be reliably duplicated. The cellulose fibers have inconsistent diameters, which create unpredictable pore sizes and low porosity.

What is Zeobrite filter media?

Zeobrite filter media can be used as a replacement for sand in your filter and provides superior water clarity. It is composed of naturally occurring minerals that can trap tiny particles in your pool much more efficiently than sand. Cuts backwashing up to 50%, saving chemicals, time & money!

What is a HVAC media filter?

A media filter is designed to improve indoor air quality. A media filter is made of a deeply pleated, paper-like material that removes dust, pollen, pet dander and other particles. Because media filters are pleated and compressed, there is a lot—up to 75 square feet—of media if you stretched it out.

What is glass fiber filter paper?

Compare Tool. Select up to 3 products. Glass Microfiber Filter Paper. 1 – 32 of 42. Related Categories: Whatman Glass Microfiber Filters | 0.7 Glass Fiber Filter | Glass Fiber Filters | Borosilicate Glass Fiber Filter | Gf B.

What is glass Fibre filter paper?

MS© Glass fibre filters are manufactured from 100% borosilicate glass. these depth filters combine fast flow rate with high loading capacity and retention of fine particulates. the small-diameter fibres five glass fibre media superior efficiency and dirt holding as compared to cellulose and synthetic media.

Which is better oil filter cellulose or synthetic?

The filter media has been created from 100% polypropylene and lasts two to three times longer* than cellulose media. Synthetic media has two other advantages – it has more consistent flow rate and holds its form better than cellulose-based filter media. *Duration may vary depending on application.

How much Zeobrite do I need?

Zeobrite weighs approximately 50lbs per cubic foot. Therefore, a sand filter that holds 300 lbs of sand would require 150lbs of Zeobrite. The 150lbs of Zeobrite will fill the sand filter to approximately the same volume level as 300lbs of sand.

How long does zeolite last in a pool filter?

5-7 yrs
Zeolite is also supposed to last 5-7 yrs as opposed to the 3-5 of silica sand. Zeolite is more expensive but if you are having the media changed by a pool pro; the money you save on labor because you don’t have to change it out as much makes up for some of the expense.

What is glass fiber filter media made of?

Glass fiber filter media is made from 100% micro-fine borosilicate glass fibers. Glass fiber filters are used where high flow rate and micron/sub-micron filtration is required. The filter media can be used for both liquid and air filtration. In the highest purity form, HI-Q offers a binderless “AE” grade glass filter media.

What is fpfp2000 glass fiber media?

FP2000 was developed and produced specially for use in high volume PM-10 air sampling equipment that collects atmospheric particulates and aerosols. Properties of Glass Fiber Media: The borosilicate glass fibers are inert and resistant to all but strongly alkaline bases or acids such as hydrofluoric acid.

What is the highest purity glass filter media available?

In the highest purity form, HI-Q offers a binderless “AE” grade glass filter media. With its’ excellent purity, using the FPAE-XX series filter paper reduces the overall possibility of extractable organics commonly found in cellulose filter paper.

What type of binder is used in the filter paper?

ASTM Spec) is used to retain the filter paper integrity during air sampling and routine handling. The total borosilicate glass microfiber composition found in the FP2063-XX & FP2061-XX filter media contains less than 5% acrylic resin binder.