Can an 8 point socket be used on square drive heads?

8 point, or even special 4 point sockets from Snap On, are great for square headed set screws, drains for small engines, or square headed gearbox plugs. A set of 8 points is not used very often, but real handy when you do need them!

What are 8 point sockets for?

Proto® 8 Point Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. Made from high-strength steel to help minimize wall thickness and provide access to fasteners in recesses and where nuts and bolts protrude.

What socket fits a square head?

Try using a socket that fits the number of corners on your square head bolts. These Square Socket or 4-point sockets fit many of the common head sizes we sell.

Will a 12 point socket fit a square nut?

12 point sockets work just fine on square head bolts.

What’s the point of 12 point sockets?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

How many points is a socket?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.

How do you loosen a bolt on a square head?

Use a small flat head screwdriver. Insert the flat head screwdriver between two opposite edges of the screw head. Turn counterclockwise to remove the screw. Make sure you turn slowly so as not to damage the head.

How do you remove a square head plug?

If a square head plug is to be removed, pound on the head of the plug using a one pound hammer. Rhythmic blows, not too hard, should be used and continued for a minute or more. A spray penetrant, like WD-40, always helps. Use a large wrench, like a 12″ crescent to remove the plug.

Will a 12 point socket work on a 4 point nut?

usually you can find a 12pt socket that will fit over a square nut, but thats not something they are designed for. if the nut is very tight, you will likely round it off. the reason is the angle of those points.

How many pins are in an 8 point socket?

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely. Lg. Quickly position these sockets on square fasteners. They are made to withstand the high torque and force of impact tools.

Can a square socket be used with an 8 point fastener?

Quickly position these sockets on square and external 8-point fasteners. Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1, 000 volts to meet IEC 60900. Pivot the head to access fasteners from an angle. Turn many sizes of square, hex, and 8-point fasteners with one socket.

Why do you need a square head socket?

Easily drive your square head bolts or tighten your square nuts Square head sockets are designed specifically to work with impact tools, featuring increased strength and torque, easier access to tight areas and reduced wear. Just remember that if you drive a screw or bolt in to far there is no solution other than filling the hole. 1/2″ Drive

How big is an 8 point socket in SAE?

3/8 in. Drive SAE Spline Socket Set, 7 Pc. 3/8 in. Drive SAE Professional Socket Set, 12 Pc. 3/8 in. Drive SAE Professional Socket Set, 12 Pc. 3/8 in. Drive Metric Spline Socket Set, 7 Pc.