Is hypertherm a good plasma cutter?
However, its overall value can’t be perceived through price alone – it’s a superior, powerful plasma cutter with plenty of versatility to go about, it can switch through consumables at a rapid rate, and it’s very compact and transportable. Overall, it’s more than worth the price.
How thick will a hypertherm 65 cut?
Handheld or mechanized plasma system for cutting and gouging metal
Operating data | ||
---|---|---|
Capacity | Thickness | Cut speed |
Recommended | 3/4″ (19 mm) | 20 ipm (500 mm/min) |
1″(25 mm) | 10 ipm (250 mm/min) | |
Severance | 1-1/4″ (32 mm) | 5 ipm (125 mm/min.) |
How much does a good plasma cutter cost?
The average cost of a plasma cutter unit on sale can range from $475 – $800. Although the price is not necessarily an indication of the product quality, you can expect to pay more for plasma cutters on the high end of the quality spectrum.
How thick will a hypertherm 45 cut?
Cut capacity
Capacity | Thickness | Cut speed |
---|---|---|
Cutting | ||
Recommended | 16 mm (5/8″) 22 mm (7/8″) | 500 mm/min (20 ipm) 250 mm/min (10 ipm) |
Severance (hand cutting) | 29 mm (1-1/8″) | 125 mm/min (5 ipm) |
Pierce* | 12 mm (1/2″) |
Do all plasma cutters need air compressor?
Plasma cutters need air pressure to cut in a two-stage process. Therefore, all plasma cutters need an air compressor to generate enough air pressure for the task. If you buy a plasma cutter without a built-in source of air, you’ll need a separate air compressor.
What is the best plasma cutter?
The 9 Best Plasma Cutters
- Lotos LTP5000D Plasma Cutter.
- Yeswelder CUT-55DS Plasma Cutter.
- Eastwood Versa Cut 40 Amp Plasma Cutter.
- Hobart Airforce 27i Plasma Cutter.
- Lincoln Electric Plasma 20 Plasma Cutter.
- Hypertherm Powermax 45 Plasma Cutter.
- Primeweld Cut60 Plasma Cutter.
- Miller Spectrum 625 Plasma Cutter.
How thick can a 65 amp plasma cutter cut?
The Hypertherm Powermax 65 is a powerful and versatile plasma cutter. It has a max output of 65A, can cut 1″ steel at 10 inches per minute, and offers a 50% duty cycle. It offers both handheld and CNC functionality. In a previous article we reviewed the Hypertherm Powermax 45 from Hypertherm.
How much air is needed for a plasma cutter?
So how much air does a plasma cutter need? Air requirements for a plasma cutter will require about 4-8 SCFM delivered at 90-120 PSI. This will cover units that are intended for up to 3/8″ thick steel to large units that can handle 7/8″ this steel.
What PSI is needed for a plasma cutter?
For the majority of the Everlast product line, air pressure required to operate the torches is anywhere between 55 to 70 psi. Low amperage cuts will require less air pressure for more stable operation, sometimes down to 45 psi or so, or the arc will be blown out.
Which is the best Hypertherm plasma cutter to buy?
The Hypertherm Powermax 380 plasma cutter is a very popular model, as it delivers outstanding performance with its cutting edge technology in plasma cutting. It adds value to the metal sheet contractor, fabricator and the service person.
What are the specifications of a Hypertherm Machine torch?
The machine torch specifications are 3/8” @ 100% duty cycle and 5/8” @ 50% duty cycle. The Hypertherm Powermax 380 plasma cutter cuts different materials like mild steel, aluminum and stainless steel.
Why is plasma the most popular metal cutting method?
Plasma is one of the world’s most popular metal cutting methods for good reason: it strikes the perfect balance between cut quality, cut speed, and cost. Hypertherm plasma systems are trusted and used by more businesses and people than any other brand.
What are the specs of a PowerMax 380?
Powermax380 (Discontinued) Input Voltages 115/230 V, 1 PH, 60 Hz, CSA Input Current @ 2.43 kW 115/230 V, 1 PH: 28/14 Amp Output Voltage 92 VDC Output Current Adjustable, 14 – 27 Amps Duty Cycle 35% @ 27 Amps, 40°C (104°F)