What kind of wood is used for sauna benches?

Soft grain wood is the key for building sauna benches. In North America, Western Red Cedar is the “go too” premium choice for making sauna benches. The wood is soft, relatively cool compared to other wood, and looks beautiful.

How wide should sauna bench be?

How wide should sauna benches be? 24″ is the magic width for sauna benches. Building 24″ wide benches, allow us to lay down comfortably, and we have ergonomically happy depth for sitting. 24″ is especially valuable depth for our upper benches.

Can I use wood glue in a sauna?

Most infrared saunas do use glues to hold the cedar tongue and groove sections together as well as their wood frames. It is a woodworker’s glue that is very safe to use in a sauna–you can even eat it.

What screws to use in sauna?

All supports must be level in both directions (side to side and front to back) before nailing in place with #10 galvanized finish nails, 2” galvanized pneumatic staples or 2” galvanized drywall screws. Nail or screw the end supports to the back and side walls, and to the floor.

Is pine wood good for saunas?

First and foremost, when constructing a sauna, choose a softwood as it will better absorb heat released from steam. Ideal varieties of softwoods are spruce, pine and cedar. Spruce is a light wood, mostly found in Nordic regions, such as Finland. It’s both practical and cost effective.

Is pine OK for a sauna?

As well as being durable and knot-free, wood from this coniferous North American tree of the pine family is ideal for use inside saunas because it doesn’t warp and it radiates heat evenly.

Is Pine OK for a sauna?

Do you need to vent a sauna?

Venting is not required for any safety reasons but it does make the Sauna atmosphere more comfortable. It’s best to have a lower (intake) vent and an upper (exhaust) vent in a Sauna to provide for good air circulation. The lower vent brings air in for a comfortable atmosphere, and the upper vent dispels used air.

Can you heat wood glue?

Joints made using white and yellow wood glues are most easily taken apart by applying heat. Use a heat gun (photo below) on the joint line to soften the glue, and the joint will open with slow, steady pressure.