How do I reset my Jeep Grand Cherokee screen?

How do I reset my Jeep Grand Cherokee screen?

To do a soft reboot of Your touch screen in Your 2018 Jeep Grand Cherokee You’ll need to hold down the enter and volume buttons for 15 to 25 seconds. After this time has passed the screen will flash and then it should come back on and work like normal.

Why is my Jeep Grand Cherokee screen black?

The Jeep Grand Cherokee touchscreen not working can be due to multiple different things such as a short or disconnected power cable under the dash, a software glitch or issue, and it could also be a blown fuse or damage to the screen.

Why is my Jeep screen black?

An all black screen usually indicates a failure of wiring. The touch screen / head unit isn’t getting power, so it’s unable to display. A blue screen indicates a software failure — there’s not much You can do without having a dealership reflash the manufacturer’s software.

How do I reset my jeep radio screen?

Push and hold the volume and two knobs at the same time for about 10 to 20 seconds until the radio power is off. Once the system shut off it will quickly turn back on and take about a minute or so to fully come back online.

Why is my Uconnect screen not working?

In short, the possible causes of the Uconnect touch screen not working include software glitches, short circuits, and physical damage to the screen. The fixes include soft reset, hard reset, firmware upgrade, and replacing the screen.

How do you reset the touchscreen on a Jeep Compass?

Press and hold down the volume and tuner knob buttons at the same time. Hold down the knobs for 10 – 20 seconds. After holding down the knobs, the screen should flash your vehicle brand name and then go dark.

How do I reset my Uconnect 2020?

For the latest Uconnect® version 8.4, this is how you can perform a soft reset of the system:

  1. Turn your key in the ignition to “Run,” but leave the car in park.
  2. Simultaneously press the volume button and the tuner knob at the same time.
  3. Continue pressing them down for 10 – 20 seconds.

Is there a fuse for UConnect?

It’s in the fuse box under the hood and is 15 amps. You could always disconnect the battery.