What is diagonal cutters used for?

description and function. Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.

What’s the difference between side cutters and diagonal cutters?

These tools tend to be durable and hard-wearing, designed for tough professional applications. One of the key differences is that diagonal cutters are often better suited to smaller, more delicate cutting tasks, whereas side cutters are ideally suited to larger-scale applications.

Are diagonal pliers the same as wire cutters?

Diagonal pliers are specifically used to cut wire. The name given to these pliers differs also in other countries e.g. they are called snips in Ireland and the United Kingdom, but on the other hand, in Canada and Australia, they are called side cutters.

What tool is called a dyke?

Diags or dikes is jargon used especially in the US electrical industry, to describe diagonal pliers. “It is also the term used for hose clamping pliers that crush a hose, shutting off the flow of fluid with a pair of parallel surfaces that come together.”

How does diagonal cutting pliers work?

Diagonal cutting pliers use lever action to create enough force to cut through small pieces of metal. The force applied by your hand as you squeeze the handles together is magnified through the pivot point and causes the jaws to move together.

Why are they called side cutters?

The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or “on a diagonal”, hence the name.

How thick can wire cutters cut?

Size does matter when it comes to bolt cutters. The longer the arms, the more leverage created and therefore, more cutting power. An 18-inch bolt cutter can cut metal up to 9/32 of an inch in diameter while a 24-inch bolt cutter can cut thicknesses up to 5/16 of an inch, depending on the material’s hardness.

What is a diagonal cut?

Diagonal Cut. When diagonal cutting, the knife enters at a 45 ° angle. The cutting motion is a smooth, backward draw of a very sharp knife followed by a roll of the wrist to prevent slices from sticking together.

What are wire cutters called?

The official name is “diagonal cutting pliers,” but these things commonly go by “wire cutters,” “side cutters,” or “dikes” (a shorthand version of “diagonal cutters”). For this guide, we’re using the term “wire cutters,” because, well, we think it has a nice ring to it.

What is a wire cutter?

: a tool that is used for cutting wire a pair of wire cutters.

Who uses diagonal pliers?

Proper use of diagonal cutting pliers: For work involving cutting and skinning wires, cutting and removing pins, nails and other fasteners.

What are diagonal cutters?

Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters or side cutting pliers) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything). The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or “on a diagonal”, hence the name.

What’s the difference between Diagonal pliers and wire cutters?

They usually do not know the difference between diagonal pliers and symmetrical wire cutters. Pliers are hand tools that are used to grab and hold objects securely as well as cutting and bending such material, example of which is wire.

Which is the best type of wire cutter?

Different Types Of Best Wire Cutters Explained (With Pictures) 1 1 .Hakko CHP170 Flush Cutter. 2 2. Xuron Micro Shear Cutter. 3 3. Whizzotech Diagonal Pliers (Side Cutter) 4 4.End Cutting Pliers. 5 5. Insulated Wire Cutters.

Why do you use a side Cutter to cut wire?

But side-cutters are in used everywhere in the world and in every trade or profession that requires soft, pliable wire to be cut. However, side-cutters leave a sharp spike on the wire after cutting, which is the result of the jaws forcing the wire to break, rather than cutting through cleanly.