How do you tie a sea fishing shock leader?

How to Tie the Shockleader Knot

1. Tie a simple overhand knot on the 50lb or 60lb leader line.
2. Put the end of the mainline through the overhand knot before it is pulled tight.
3. Wet the overhand knotwith saliva and pull it really tight.

How much shock leader should I use for sea fishing?

For every ounce of lead, use 10 lbs of shock leader. For example, if you’re using a 3 oz weight, use a 30 lb shock leader. If you’re using a 4 oz weight, use a 40 lb shock leader. As far as the length goes, use 2-3 rod lengths plus 4-5 rotations around the spool.

What is a shock leader in sea fishing?

A surf fishing shock leader is a heavy line extension (typically 80 lb monofilament) added to the main fishing line in order to absorb the massive stress you create when loading the rod. The shock leader should measure around 27-30 feet and be tied to the main line using a small solid knot.

How long should your shock leader be?

A shock leader is a length of line strong enough to take this added pressure, that generally when casting runs from the rig top through the rod rings and then 6-10 turns around the reel spool, in general around 30ft in length is plenty.

Can you fish braid without a leader?

Why would you fish Braided Line without a Leader? You can throw a thinner diameter line, without worrying about adding a big chunky leader. You eliminate one more potential weak spot. Tying on a leader, no matter what type of knot you use, adds one more potential weak spot to your fishing setup.

Should I use a leader for surf fishing?

Leaders are extremely important for surf fishing. Most surf rigs and line configurations require adding an extension to the main line in order to protect the terminal tackle or to make the bait presentation more appealing to fish. Having a leader is therefore supposed to make surf fishing easier and more rewarding.

When to use a main line or shock leader knot?

Main Line / Shock Leader Knot. This knot is used to connect a strong shock leader (typically 50lb – 80lb breaking strain) to a weaker main line of 12 – 20lb. This is the strongest and safest way of tying together two lines of different breaking strains and is most commonly used as the join between the main line on a reel and…

How to knot a reel line with A shockleader?

Push reel line through on same side of loop that leader exits. 3. Tighten the loop in the leader all the way so it grips the reel line. 4. Form a loop in the reel line and hold it against the shockleader. 5. Take around leader and through loop five times. Pull gently. 6. Tighten the reel line coils and slide up to knot in the leader.

When to use a shock leader for fishing?

And finally, to connect your shock leader to your mainline, use the double uni knot as demonstrated in the video above. If you’re fishing with light line and you’re using heavy leads, or you’re on a beach with rocky or shelly bottom, you probably want to use a shock leader to decrease the odds of your line breaking.

What’s the best way to tie A shockleader?

There are many knots that you can use to attach a shockleader to your main line, but the simplest has to be the half hitch/grinner knot. Step Two. Start by making a simple overhand loop at the end of your Climax shockleader line like this.