How do I reset my Bose Wave?

Reset your Wave Radio by following these steps:

1. Turn the radio off.
2. Unplug the power cord from the power outlet.
3. Remove the battery located in the bottom of the radio. Wait 30 Seconds.
4. Reconnect the power cord.
5. Test the radio. If the radio operates properly, replace the battery with a new one.

Where is the model number on a Bose Wave?

Wave Radio/CD serial number location: The serial number is found on the bottom of the product below a barcode.

How do I know what Bose system I have?

On-ear. Check the headband for a 4-digit code. If you are unable to locate one, remove the cushion to reveal the 17-digit serial number on the earcup. If your headphones use a rechargeable battery, remove the battery and look inside the battery compartment.

How do I preset my Bose radio?

Note: Presets cannot be deleted but can be replaced.

1. With the remote, tune to a radio station.
2. Press and hold the preset number button (1 through 6) on which to store the station. After a couple seconds, a tone is heard and the preset number appears on the system display to confirm.

How do you set the clock on a Bose radio?

Turn on your Bose Wave sound system using either its “On” button (on the case) or the “Power” button on the remote. Press down on and hold the “Clock Set” button. Press the “Tuning <” or “Tuning Down” button on the front of the Bose Wave. This will move the displayed time on the Bose Wave backward, decreasing the time in one-minute increments.

Can you add wireless speakers to the Bose Wave system?

There is one way you can accomplish adding other wireless Bose speakers to your existing Wave radio. You can purchase the SoundTouch Wireless Link Adapter and connect it to your Aux input on the back.

When did Bose introduce the wave radio II?

The “Wave Radio II” was introduced in 2005 and was based on the Wave Music System without the CD player. It used a dual tapered waveguide and revised speakers. The “Wave Radio III”, introduced in 2007, was identical in appearance to the Wave Radio II and added Radio Data System (RDS) and a large snooze button on top of the unit.

What is a Bose Wave system?

The Bose Wave/PC was a system to play mp3 files and digital radio from a Windows PC. It was released in 2001 and based on the Wave Radio design. The system could find local radio stations based on one’s zip code. The Wave/PC connects to the computer via a serial data cable and an audio plug directly into the sound card.